.

Tunnel formwork bypass channel

The tunnel formwork channel is a non-standard product specially designed and manufactured for the concrete lining of water tunnels such as tunnels and culverts. It has the functions of vertical mold and demoulding function, high surface finish of lining and fast lining speed. The working process of the steel formwork trolley is carried out in the following steps:

FIRST, CHECK WHETHER THE TUNNEL CONSTRUCTION CONDITIONS MEET THE DESIGN REQUIREMENTS OF THE TEMPLATE TROLLEY:

Since the formwork trolley is a non-standard equipment, the conditions of use must meet the design requirements before lining.

(1)Check whether the road surface elevation and road surface condition meet the design requirements, the road surface elevation: as shown in the figure; the road surface condition: concrete road surface.

(2)Check whether the sleepers and rails meet the design requirements;

(3)Check whether the outer surface of the steel formwork is coated with a release agent.

...

For more information about Tunnel formwork bypass channel, please visit:



在线联系供应商

至: Luoyang Gaofei Bridge Tunnel Machinery Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

WATER CONSERVANCY AND HYDROPOWER LINING TROLLEY
WATER CONSERVANCY AND HYDROPOWER LINING TROLLEY WATER CONSERVANCY AND HYDROPOWER LINING TROLLEY ADVANTAGES Ensure that the strength of the water conservancy and hydropower lining trolley i...
hydraulic system
hydraulic system The lining trolley hydraulic system is the power source for the trolley to complete the vertical mold and demoulding work. Except for the trolley t...
Tunnel lining concrete grouting device
Tunnel lining concrete grouting device The main function of the tunnel lining concrete grouting device is to transport the concrete through the pressure of the high-pressure concrete con...
水利水电衬砌小车
水利水电衬砌小车 PIPELINE MUNICIPAL LINING TROLLEY ADVANTAGES 1.SHORT CONSTRUCTION PERIOD Compared with the traditional bakelite formwork and the aluminum al...
Hydraulic inverting bridge formwork
Hydraulic inverting bridge formwork Hydraulic inverting bridge formwork solves the problems of inconvenient, poor adaptability, low efficiency and low safety protection facilities in ...
供应产品

Same products

IADC537/617/637 牙轮掌片 牙轮钻头掌片出售
IADC537/617/637 牙轮掌片 牙轮钻头掌片出售 卖方: 河北亿川钻井设备制造有限公司 钻头尺寸 8 1/2"(215.9MM)617型应用适用于桩基施工的牙轮钻芯筒特点 1. 增强耐磨规保护,增加工作寿命。2.耐高温橡胶密封轴承。3.加大轮体,镶件全覆盖,使用寿命更长。 14mm...
8 1/2 英寸 IADC617 单牙轮钻头 用于非开挖用牙轮钻头
8 1/2 英寸 IADC617 单牙轮钻头 用于非开挖用牙轮钻头 卖方: 河北亿川钻井设备制造有限公司 钻头尺寸 8 1/2"(215.9MM)617型应用适用于HDD工程开孔器特点 1. 增强耐磨规保护,增加工作寿命。2.耐高温橡胶密封轴承。3. 碳化钨保护的衬衫尾4. 14mm锥形刀片,更高的...
Tunnel formwork bypass channel
Tunnel formwork bypass channel 卖方: Luoyang Gaofei Bridge Tunnel Machinery Co., Ltd. The tunnel formwork channel is a non-standard product specially designed and manufactured for the...
Tile Grout
Tile Grout 卖方: Kelin New Material Company Kelin tile grout is a new product for home decoration, which is totally instead of the sewing age...
steel pipe
steel pipe 卖方: Tianjin Arcelormittal Steel Trade Co.,Ltd