Automotive Mold

Plastic Auto Parts Sensor Mould

HanKing Mould produce all different kind fuse and connector for international OEM company, we have a lot of experience to short the project development time.

HanKing Mouldserves for globally Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing team to provide customers the fast development time and stable quality to ensure the new project running well. Shenzhen Hankingengineer will analysis the filling to obtain the best gate position the best flowing regime, and design the best cooling channel to ensure the minimum wrapping deformation and we have a very good injection operator to help set the best injection parameter to avoid any development time waste and improving the molding parameter reliability.

HanKing Mould is very experienced in small and medium-sized automotive plastic mould, in the past years, the types of products we involved were included fuse and fuse box, connector, switch, relay, sensors, actuators, terminal, valve, handle and other body accessories.

In the development of the automotive industry, the proportion of plastic parts in automotive parts is very large, and the demand for plastic parts is increasing day by day because plastics have the advantages of beautiful appearance, lightweight and easy processing. Most plastics have a specific gravity of 0.9 to 1.6, and the proportion of glass fiber reinforced composites will not exceed 2.0, while A3 steel is 7.6, brass is 8.4, and aluminum is 2.7. The use of plastic can reduce the weight of parts by about 40%, and the cost can be greatly reduced, which makes plastic the preferred material for automotive light-weighting. Plastic is easy to molding parts with complex shapes. According to the plastic composition of the plastic, by adding different fillers, plasticizers and hardeners to produce the desired properties of the plastic, changing the mechanical strength and processing properties of the material to meet the requirements of different parts of the car. The plastic consumption of each auto part accounts for 20% of the total vehicle materials and may reach 35% in the future. When the auto company develops a new car, it needs to use hundreds of sets of plastic injection molds, which requires the quality assurance of plastic parts in production, and the quality of plastic parts is determined by the mold.

Which parts of the car are commonly used in plastic?

Bumper, the instrument panel accessories, inlet grille, fender, radiator grille, trim panel, engine parts, Water tank accessories, air conditioning accessories, air filter accessories, various kettles, seat accessories, floor panel accessories, roof panel accessories, bar accessories, steering wheel accessories, door trims, rearview mirrors and various fastener, front and rear lamp, etc.

Other supplier products

	Industrial Molding Parts	Industrial Molding Parts Industrial moulding parts are referred to the plastic parts of industrial precision molded products, we preferred to thin...
	Precision Automotive Parts	Mould Name: Precision Automotive PlasticsMould Part Material: PA66 G30 Product Description: BODY plastic Mould Cavity: Cavities Mold Mo...
	Industrial Mould	Industrial mould is not a mold technology process, but a type of mold that is distinguished from the purpose of use. Generally speaking, products ...
	Plastic Insert Mold	With continuous developments and progresses, we have become theprofessional china plastic injection mould manufacturers, offering custom plastic in...
	Plastic Injection Moulds	At present, more than 90% of plastic products in our daily life are injection molded. The market prospect, capacity, and application are large and ...

供应产品

Same products

	ARM Cortex-A53 控制器支持 Linux Ubuntu，具有 4DI 到脉冲计数/数据控制，适用于智能工厂	卖方: 钡铼技术	ARMxy BL340 系列是基于 Allwinner T507-H 处理器的工业 ARM 控制器，配备四核 ARM Cortex-A53 CPU，最高可达 1.4GHz。它具有 8/16GB ...
	ARM 2*Cortex-A53 电脑带2DI+2DO 支持Ubuntu储能	卖方: 钡铼技术	ARMxy BL340 系列是基于 Allwinner T507-H 处理器的工业 ARM 控制器，配备四核 ARM Cortex-A53 CPU，最高可达 1.4GHz。它具有 8/16GB ...
	T507-H 处理器控制器 8GB eMMC 1GB DDR4 + 4RS485 支持 Linux 用于边缘计算	卖方: 钡铼技术	ARMxy BL340 系列是基于 Allwinner T507-H 处理器的工业 ARM 控制器，配备四核 ARM Cortex-A53 CPU，最高可达 1.4GHz。它具有 8/16GB ...
	ARM 计算机 8GB eMMC 1GB DDR4+16GPIO 支持工业物联网的 Docker。	卖方: 钡铼技术	ARMxy BL340 系列是基于 Allwinner T507-H 处理器的工业 ARM 控制器，配备四核 ARM Cortex-A53 CPU，最高可达 1.4GHz。它具有 8/16GB ...
	1.4GHz 计算机配备 4*PGIO，支持 Ubuntu 用于储能 ARM 计算机。	卖方: 钡铼技术	ARMxy BL340 系列是基于 Allwinner T507-H 处理器的工业 ARM 控制器，配备四核 ARM Cortex-A53 CPU，最高可达 1.4GHz。它具有 8/16GB ...