KYN61-40.5kv Metal clad Movable MV Switch panel
The enclosure is assembled after bending the aluminum-zinc steel-sheet which connected via high-strength bolts and riveting nuts, with panel spray coating.
Realize lock-door operation: All the normal operations inside the cabinet such as circuit breaker, earthing switch and etc, are carried out under lock condition of HV disconnector door. Each miniature functional compartments of the switchgear is packed via metallic baffle, and pressure release passage is set individually.
The insulation method of busbar applies thermal pyrocondensation insulation material and epoxy painting, optimize the electrode shape, thus the cabinet structure is compact, and correspondingly the occupied area is reduced.
Other supplier products
|
|
40.5kV 72.5kV 145kV gas insulated Plug And Switch System COMPASS |
ZCW-126/T2000-40 COMPASS, adopting air as arc insulating medium and SF6 gas as the arc control medium, is to be used for the control and protection... |
|
|
TK-SVC HV dynamic Static Var Compensation |
Based on the UHF detecting GIS partial discharge principle, the system is applied for real-time on-line intelligent monitor on GIS of each voltage ... |
|
|
Assembling high voltage shunt parallel capacitor |
HV shunt capacitor is shunt connected with AC power electric system PF (50Hz or 60Hz) equals and above 1kV, which is used to improve the power fact... |
|
|
Case Gas Insulated Switchgear XGN6A-12 C-GIS |
XGN6A-12(V) Case Gas Insulated Switchgear (hereinafter refered as C-GIS) is a distribution device complete for 12kV three-phase 50Hz single-bus and... |
|
|
outdoor single column, single arm, vertically shrinkable, HV AC Disconnector isolator |
GW22A single-post vertical extend-retract outdoor three-phase high-voltage AC disconnector,rated frequency 50Hz, rated voltage 126kV, 252kV, and 36... |
供应产品
Same products
