BYTF606-2K Primer Surfacer
Auto Coatings
Product Name/Model：BYTF606-2K Primer Surfacer
Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling power andfine adhesion between coats, fast drying time, easy sanded.
|
Substrates |
Dried and sanded existing finishes, all kinds of primer and putty. |
||
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again with degreaser. |
||
|
MixingRatio |
BYTF606-2K Primer Surfacer |
BYTH106 2K Primer Hardener |
Thinner |
|
4 |
1 |
1-1.5 |
|
|
＜15℃ |
BYTF606 2K Primer Surfacer |
BYTH106 2K Primer Hardener |
BYTX-1 FastThinner |
|
15-30℃ |
BYTF606 2K Primer Surfacer |
BYTH106 2K Primer Hardener |
BYTX-2 StandardThinner |
|
＞30℃ |
BYTF606 2K Primer Surfacer |
BYTH106 2K Primer Hardener |
BYTX-3 SlowThinner |
|
Pot-Life |
At 20°C, 3 hours mixed with hardener, thinner |
||
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends on temperature andpaint film. |
||
|
Drying Time |
|
||
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
||
|
Package |
1L×12or3.75L×4 |
||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
在线联系供应商
Other supplier products
 |
F606-2K Primer Surfacer | 1、F606-2K Primer Surfacer Automotive Paints Supplier Product Name/Model:F606-2K Primer Surfacer Characteristic: Multi-purpose two-component 2K... |
 |
MF-680 Extra Fast Clear Coat | MF-680 Extra Fast Clear Coat. Automotive Paint company Product Name/Model:MF-680 Extra Fast Clear Coat. Characteristic:Extra fast drying clear... |
 |
MF930-2K Binder | MF930-2K Binder Refinish Automotive Paint Product Name/Model:MF930-2K Binder Characteristic: Resin solution used as additive for spraying MF2K Sol... |
 |
BYTF609-Matting Agent | BYTF609-Matting Agent. Automotive Coatings China Product Name/Model;BYTF609-Matting Agent. Characteristic: Used to reduce the brightness of pa... |
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
Same products
 |
Epimedium Extract | 卖方: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | 卖方: Fruit Powder,Vegetable Powder | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
