Low Temperature-resistance TPO
The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics:
In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant but also display a more broad temperature resistant character——displaying excellent mechanical properties and aging properties at the test temperature of -50℃—+125℃. So, this is the optimized insulant for wires and cables which have special requirements for low-temperature resistance.
The jacket made up of TPO wire and cable insulant from ATP keeps its section surface smooth and orderly with little retraction rate after immersing in solder machine (350℃/2”). In the application of high-temperature-resistant cables (temperature≤125℃) such as charging vehicle cables (EV Cable), equipment connection cables, etc., the jacket made up of TPO wire and cable insulant from ATP takes the place of XLPE materials to meet the requirements of insulant high-temperature aging and shrinkage for nominal cables. And this can simplify the processing procedures by a large margin and improve the processing efficiency and yield.
Application: TPO has the characteristics of small specific gravity, good impact strength, and low-temperature brittleness, and is suitable for applications in the cable industry.
Technical Data of Low Temperature-resistance TPO
|
Technical Data Sheet |
Model |
||||
|
Material Properties |
Test Standard |
Test Condition |
Unit |
2895F-ESS-1008S |
|
|
General Characteristics |
Material Category |
- |
- |
- |
|
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
||
|
Extrusion/Injection |
- |
- |
- |
||
|
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
97 |
|
Proportion |
ISO 1183 |
- |
g/cm³ |
||
|
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
|
Brittle Temperature |
ISO 812 |
- |
℃ |
||
|
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
590 |
|
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
|
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
|
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
|
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
|
Permittivity |
ASTM D150 |
- |
- |
||
|
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
|
Oxygen Index |
ASTM D2863 |
- |
% |
||
|
Feature |
|||||
As one of the most professional polymer compounding companies, we provide polymer compound, tpo polyolefin, polymer thermoplastic, tpe elastomero termoplastico and etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
| TPEs from ATPolymer | Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable... | |
| Flame Retardant XLPE | ATP's HPPO series, New upgrade product of XLPE material sheath for most of the kinds of electronic wires (3385, 3386, 10368, etc.), flat wires, and... | |
| TPEs from ATPolymer | Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable... | |
| Injection Molding TPEs | Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application T... | |
| LSZH Compound from ATPolymer | ATP starts the LSZH compound ( LSOH material ) research and development for various applications such as Rail Transit, Architecture&Home Decora... |
Same products
| Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... | |
| Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... | |
| Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... | |
| Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... | |
| Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
















