Medical Equipment Cable Jacket TPEs
ATP's TPE plasticthermoplastic elastomer series
passed ISO10993 "bio-compatibility" test;
Pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH,1000Hrs) test;
Compared with TPU cable sheath, TPEs cable sheath presents a softer touch;
low density (≤0.95), high processing efficiency, the best solution for discarded medical cable sheath.
Technical Data of Medical Equipment Cable Jacket TPEs
Technical Data Sheet |
Model |
||||
Material Properties |
Test Standard |
Test Condition |
Unit |
2560F-ESU-2514S |
|
General Characteristics |
Material Category |
- |
- |
- |
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
||
Extrusion/Injection |
- |
- |
- |
||
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
55 |
Proportion |
ISO 1183 |
- |
g/cm³ |
||
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
Brittle Temperature |
ISO 812 |
- |
℃ |
||
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
424 |
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
Permittivity |
ASTM D150 |
- |
- |
||
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
Oxygen Index |
ASTM D2863 |
- |
% |
||
Feature |
As a professional polymer compound manufacturer, we provide tpe elastomer, atp material, tpe plastic material, tpe cable jacketetc. For tpe plastic meaningor more information, please feel free to contact us!
在线联系供应商
Other supplier products
UV-resisitance TPU | SER—V Series UV Resistant HFFR TPU(105/℃ 80℃Heat-Resistance) Applied Fields: HFFR wire & cable with stable, long-term UV resistance... | |
Flame Retardant TPEs | Technical Data of Flame Retardant TPEs There are many thermoplastic elastomer suppliers, but we are one of the best choices for you. As a therm... | |
High Hardness LSFH | High Hardness LSFH All or part of the insulation layer, sheath, outer sheath, and auxiliary materials (taping and filling) of halogen-free low-smo... | |
TPEs from ATPolymer | TPESale Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the fin... | |
ATPolymer In Industrial Cables | ATP's material polymer with High Temperature-resistance and Microbial-resistance, those are quite good player in the industry ATP For Robot Cont... |
Same products
LUBCON Thermoplex ALN 1001/00 50ml Oil Original New | 卖方: 广东聚广恒自动化设备有限公司 | Special properties. - High resistance towards oxidation and high temperatures. - High load carryi... | |
Kluberoil Lamora D 220 30ml Original Oil | 卖方: 广东聚广恒自动化设备有限公司 | Good demulsifying behaviour towards water-miscible cooling lubricants · Optimised coeffici... | |
LUBE SH-ONE-4S 400G for Fanuc Machines | 卖方: 广东聚广恒自动化设备有限公司 | TheSH-ONEseries ofgreaseisoneof the latest released byLUBEand are used on a range of Fanuc machines | |
Mobil Grease 28 Synthetic Aviation Grease | 卖方: 广东聚广恒自动化设备有限公司 | Mobilgrease 28is the polyalphaolefin (PAO), clay-based multipurpose airframe and wheel bearing gr... | |
Kluber Isoflex Topas NCA 5051 50ml Original Lubricants | 卖方: 广东聚广恒自动化设备有限公司 | ISOFLEX TOPAS NCA 5051 is used in plain bearings in the automotive industry. ISOFLEX TOPAS NCA 50... |