Extruding/Under Extruding TPEs
Extrusion-grade TPE
Products Characterization:
Smooth & matt surface, excellent hand-feeling. Good tensile strength and elasticity. Halogen-free, meet RoHS demand.
Application
Mobile/MP3 ear wire. Computer signal wire. PS2 terminated line. Audio & video signal terminated wire.
TPE TPEE extrusion guidance:
|
Section 1 |
Section 2 |
Section 3 |
Section 4 |
DIE |
|
180-200℃ |
185-205℃ |
190-210 ℃ |
190-220 ℃ |
180-200 ℃ |
Adjust tpe processingtemperature according to as the extruder screw
Technical Data of Extruding/Under Extruding TPEs
|
TPETPEE Technical Data Sheet |
Model |
||||
|
Material Properties |
Test Standard |
Test Condition |
Unit |
2575F-ESS-1004T |
|
|
General Characteristics |
Material Category |
- |
- |
- |
|
|
Appearance(Light/Semi-matte/Frosted) |
- |
- |
- |
||
|
Extrusion/Injection |
- |
- |
- |
||
|
Physical Characteristics |
Hardness |
ISO 48 |
15S |
Shore A |
76 |
|
Proportion |
ISO 1183 |
- |
g/cm³ |
||
|
Melt Index |
ISO 1133-1:2011 |
190℃/2.16kg |
g/10min |
||
|
Brittle Temperature |
ISO 812 |
- |
℃ |
||
|
Mechanical Properties |
Elongation |
ISO37:2017 |
200mm/min |
% |
620 |
|
Tensile Strength |
ISO37:2017 |
200mm/min |
Mpa |
||
|
Tearing Strength |
ISO34-1:2015 |
500mm/min |
KN/m |
||
|
Hot Air Aging |
Elongation Retention Rate |
ISO37:2017 |
- |
% |
|
|
Tensile Strength Retention Rate |
ISO37:2017 |
- |
% |
||
|
Electrical Performance |
Volume Resistivity |
ASTM D257 |
- |
Ohm-cm |
|
|
Permittivity |
ASTM D150 |
- |
- |
||
|
Combustion Performance |
Vertical Burning Test |
UL 94 |
- |
||
|
Oxygen Index |
ASTM D2863 |
- |
% |
||
|
Feature |
|||||
As one of polymer compounding companies, we can of advanced polymer compoundingmaterials for sale, anything you need, please contact us.
在线联系供应商
Other supplier products
 |
ATP Polymer Compounds | Through technological innovation, ATPolymer is committed to developing the next generation of advanced materials and environmental protection techn... |
 |
Foaming Ocean TPEs | Product Description: HTPO series of lightweight polymer products are foamed with high-performance controllable technology. It is a new type of u... |
 |
Foaming Ocean TPO | The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: In the application of cable insulan... |
 |
Silane Crosslinking LSZH | Silane cross-linked low-smoke halogen-free flame-retardant polyolefin cable material is convenient to use, not only can be quickly cross-linked und... |
 |
Injection Molding TPEs | Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application T... |
Same products
 |
Irradiation cross-linking LSZH | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | Irradiation cross-linking LSZH Silane cross-linked low-smoke halogen-free flame-retardant poly... |
 |
Hight Flame Retardant LSOH | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | High hardness LSOHperformance: Fully support the optical cable through the EN 50575:2014+A... |
 |
High Temperature-resistance TPU | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | Fully support the cable pass UL 758/1581，80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Def... |
 |
High Hardness TPEs | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | Product description: high-hardness (≥90A) TPU materials, with problems of abnormal glue, surfa... |
 |
High Hardness LSFH | 卖方: GuangDong Advanced Thermoplastic Polymer Technology Co.,Ltd | High Hardness LSFH All or part of the insulation layer, sheath, outer sheath, and auxiliary ma... |
