Ethylene acrylate rubber compound
Ethylene acrylate has excellent heat and chemical resistance. It can be used within -40℃~175℃, has excellent ozone resistance, aging resistance, good compression permanent deformation, and good tolerance to oils such as automotive transmission oil and engine oil, so it is widely used in automotive accessories.
Technical parameters:
| Category | Details |
|---|---|
| Composition | –Base Polymer: Ethylene-Acrylate Ester Copolymer (AEM, e.g., Vamac®) |
| –Reinforcing Fillers: Carbon black (40–60 phr), silica (10–20 phr) | |
| –Plasticizers: Adipate esters (5–10 phr) | |
| –Curing Agents: Peroxide (DCP, 1–3 phr) or diamines (0.5–2 phr) | |
| Physical Properties | –Hardness (Shore A): 60–90 (ASTM D2240) |
| –Tensile Strength: 10–20 MPa (ASTM D412) | |
| –Elongation at Break: 200–500% (ASTM D412) | |
| –Density: 1.1–1.3 g/cm³ | |
| Thermal Resistance | –Service Temperature: -30°C to +175°C (intermittent 200°C) |
| –Thermal Stability: <8% weight loss at 175°C (24h, ASTM D573) | |
| Chemical Resistance | –Resistant To: Mineral oils, greases, engine coolants, and ozone |
| –Limitations: Strong acids, alkalis, and polar solvents (e.g., acetone) | |
| Key Applications | –Automotive: Turbocharger hoses, transmission seals, and ignition wires |
| –Industrial: High-temperature gaskets, vibration dampers, and cable jacketing | |
| –Aerospace: Fuel-resistant seals and hydraulic components | |
| Processing | –Mixing: High-shear internal mixer (70–90°C) or two-roll mill |
| –Molding: Compression/injection molding (180–200°C, 10–20 MPa) | |
| –Curing: Post-cure (180°C, 2–4h) for optimal compression set | |
| Safety & Compliance | –MSDS: Non-flammable (flash point >250°C); avoid inhalation/skin contact |
| –Regulatory: REACH, RoHS, and ISO 8067 (automotive seals) | |
| Storage | –Conditions: Dry, <25°C, away from UV/ozone; shelf life 12–18 months |
| –Packaging: Polyethylene-lined bags (prevent moisture absorption) | |
| Quality Control | –Testing: Mooney viscosity (ML 1+4. ASTM D1646), compression set (ASTM D395) |
| –Certifications: ISO 9001 (manufacturing), IATF 16949 (automotive) |
在线联系供应商
Other supplier products
 |
Accelerated Dicyandiamide Type Powder CASAMID 783 | Introduction Product: Accelerated Dicyandiamide Type Powder CASAMID 783 Description CASAMID 783 is a powder material of the accelerated dicyandi... |
 |
Navy Blue Sand Texture Powder Coating | Introduction Key attributesDetails Brand STD Place of Origin China Main Raw Material EPOXY Usage Furniture Paint, Ca... |
|
|
Special Powder Coating for Coil and Pre Coating Plate | Product Characteristic: Special powder coatings for coil and pre coating plate is not only with simple construction,excellent appearance and one-s... |
 |
Bonding Metal Powder Coating Series | Brief Description Using various series of powder coatings and aluminum, copper, gold, pearlescent and other metal pigments uniformly mixed through... |
 |
Flat Metal MT-04992489 | Introduction No. MT-049/92489 Color Star (Silver) Surface Flat Metal System Polyester Scope of application Used... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
