Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF
Product Description
MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, all require protection from the environment as well as being visually harmonious with the overall design of a vehicle. MT- A2201 clearcoats are super durable (> two years Florida) and answer to the requested performance level specified by the OEMs. The line of MT- A2201 super durable polyester clearcoats (TGIC free) stand ready with excellent appearance and performance.
Powder Properties
| Chemical Type |
Polyester super-durable |
| Area of usage |
Automotive trim parts,roof rail systems |
| Particle Size Distributon |
Custom manufactured |
| Appearance |
Smooth, satin |
| Colour |
Clear |
| Gloss (60°) |
60-65 GU |
| Density (g/cm3) |
1.20 ± 0.05 |
| Stoving schedule |
20 minutes at 190°C (time at object temperature) |
| Application |
Electrostatic |
| Storage Stability |
under dry, cool (<25°C) conditions, at least 24 months from production date |
Application
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate |
Steel panels, Aluminium |
| Pretreatment |
Bonder (WH/60/OC) iron phosphate, Bonder (722/W/OF) |
| Film thickness |
70 µm |
| Cure schedule |
10 minutes 190°C |
Mechanical Tests
| Adhesion |
DIN EN ISO 2409 |
Gt 0A |
| Erichsen Cupping |
DIN EN ISO 1520 |
≥ 3 mm |
| Impact |
ASTM D 2794 |
≥ 10 ip (direct) |
Pre-Treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application the basecoat and of MT-A2201 clearcoat. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance. Aluminium parts require a chromate conversion pre-treatmentt.
Application
MT-A2201 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Other supplier products
|
|
Valve Powder Coating |
Characteristics of Valves
Valves typically have the following characteristics:
Thick and uneven walls
Irregular shapes
Rough surfaces
High the... |
|
|
Fitness Equipment Powder |
Brief Description
This product is made of polyester resin and epoxy resin as the main base materials, combining the excellent decorative propertie... |
|
|
Thermosetting Decorative Powder Coating |
I. Product Introduction
Thermosetting decorative powder coating is a new generation of metal surface treatment technology. It forms a wear-resista... |
|
|
Polyurethane powder coating series |
Made of hydroxy polyester resin and isocyanate curing agent as the main raw materials.
Features:
–Good adhesion, good mechanical properties... |
|
|
Profile powder-Profile powder |
Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according to the industry... |
供应产品
Same products
