Single-Layer Epoxy Anti-Corrosion Powder Coating (External Coating)
Product Introduction:
This product is formulated using epoxy resin, functional curing agents, and a meticulous design. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, and cathodic disbondment. The coating also offers superior flexibility, impact resistance, and other performance characteristics.
Product Features:
Excellent adhesion to the substrate.
Smooth surface with high gloss.
Strong resistance to permeation and corrosion.
High surface hardness and dense coating, providing good resistance to plant root penetration.
Excellent resistance to high-temperature cathodic disbondment.
Low melting temperature, high reactivity, and high curing completion rate.
Powder Coating Performance Parameters:
| Item | Quality Indicator | Test Method |
|---|---|---|
| Appearance | Uniform color, no lumps | Visual inspection |
| Color | As per customer requirements | ————— |
| Density (g/cm³) | 1.3-1.5 | GB/T 4472 |
| Non-Volatile Content (%) | ≥ 99.4 | GB/T 6554-1986 |
| Magnetic Substance Content (%) | ≤ 0.002 | GB/T 2482-1986 |
Cured Powder Coating Performance Parameters:
| No. | Test Item | Technical Indicator | Test Method |
|---|---|---|---|
| 1 | Appearance | Smooth, uniform color, no bubbles, cracks, or pinholes; slight orange peel allowed | Visual inspection |
| 2 | Adhesion (Grade) | 1-3 | SY/T 0315-2005 |
| 3 | Cathodic Disbondment Resistance (24h) (mm) | ≤ 6.5 | SY/T 0315-2005 |
| Cathodic Disbondment Resistance (28d) (mm) | ≤ 8 | SY/T 0315-2005 | |
| Cross-Section Porosity | 1-4 | SY/T 0315-2005 | |
| Bonding Surface Porosity | 1-4 | SY/T 0315-2005 | |
| 4 | Flexibility (3°) | No cracks | SY/T 0315-2005 |
| Volume Resistivity | ≥ 1×10¹³ | GB/T 1410 | |
| 5 | Electrical Strength (MV/m) | ≥ 30 | GB/T 1408.1 |
| 6 | Impact Resistance (1.5J at -30°C) | No leakage | SY/T 0315-2005 |
| Chemical Resistance | Qualified | SY/T 0315-2005 | |
| 8 | Abrasion Resistance (falling sand method) | ≥ 3 | SY/T 0315-2005 |
| 9 | Salt Spray Test (1000h) | No change in coating | GB/T 1771-1991 |
Compliance Standard:
SY/T 0315-2005
Application Fields:
Municipal, water supply, drainage, sewage, circulating water, chemical, power, and other pipeline applications.
Application Process:
Electrostatic spraying.
Precautions:
The steel pipe surface should be free of oil and moisture; the surface treatment quality should reach Sa2 1/2 level (GB/T 8923); the anchor pattern depth should be 50-90 mm; dust and abrasives on the steel pipe surface should be blown clean; preheating temperature should be controlled between 180-230°C.
The product should be stored in a well-ventilated, dry indoor environment with a temperature below 30°C, away from heat sources, corrosive chemicals, and chemical solvents, and protected from strong light exposure; the stacking height should not exceed four layers; avoid long-term pressure, ensure the packaging box is sealed to prevent caking and moisture, which can affect fluidization performance.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Extreme Protection Edge powder Coating | Introduction Extreme Protection Edge powder coatings deliver exceptional edge corrosion protection in one coat. Specially formulated to cover shar... |
 |
Red series powder coating | Surface Finish Options Overview Pure red pearlescent powder coating MT-R0001 Silver red powder coating MT-R0002 Light red silver powde... |
 |
Polyamide | Typical Characteristics Typical Characteristics Nature Polyamide Appearance Off-white micronized powder Solid Content (%) ... |
 |
Kitchen supplies powder coating | Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
 |
Metallic sand texture matte MT-049/7C000 | Introduction No. MT-049/7C000 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | 卖方: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | 卖方: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | 卖方: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | 卖方: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
