.

Automotive Components Powder Coatings MT-A200 Series/powder coating with production traceability

Product Overview:

Epoxy polyester powder coating series designed for automobile engine blocks, suspension systems, filters, springs and other parts.

Coating characteristics:

-Good adhesion

-Good mechanical properties

-Excellent corrosion resistance

Application:

Suitable for various types of engines, suspension parts, filters and other automobile parts.

Application parameters:

Curing time: 180℃~200℃×10~15 minutesSpraying method: high voltage electrostatic spraying 60~80KVRecommended film thickness: 60~150um

Physical properties:

Project Instrument Judgment standard Test standard
Pencil hardness Pencil hardness tester ≥1H ASTM D 3363

GB/T 6739

Impact resistance Impact tester 50kg.cm(8mm diameter)
2.5Nm (16mm diameter)
(20mm diameter)
GB/T 1732
ASTMD2794
ISO 6272
Bending resistance Bending tester ≤2mm
(cylindrical shaft)
Conical shaft bending
Cylindrical shaft
GB/T 6742
ASTM D 1737
ISO 1519
Adhesion Hundred grid test Grade 0 GB/T 9286
ISO 2409
ASTM D 3359
Cupping Cupping tester ≥6mm GB/T 9753
ISO 1520
Salt spray resistance NSS salt spray ≥500H,Wb≤2mm GB/T 1771
ASTM B-117
ISO 7253
Moisture and heat resistance Constant temperature and humidity chamber ≥1000H slight gloss loss GB/T 1740
ISO 6270

The above tests are all conducted on 0.8mm degreased and rusted cold-rolled steel plates, with a coating thickness of 60-80um. The performance indicators of the coating will vary slightly with the gloss.

Environmental protection requirements:This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, and other heavy metals, and fully complies with RoHS2.0 environmental protection requirements.

Note:We will provide complete powder coating consultation and application customization solutions based on the actual needs of each customer. The test indicators mentioned in this report are all laboratory test data for reference only and are not intended as performance commitments for product applications. The results may vary depending on environmental factors and other conditions.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Aerospace & Aviation Powder Coatings
Aerospace & Aviation Powder Coatings Looking for premium powder coatings for aerospace and aviation components? We are a Chinese factory with over 20 years of export experience, suppl...
3-Layer Polyethylene (FPE) Anti-Corrosion Epoxy Powder Coating/advanced powder coating
3-Layer Polyethylene (FPE) Anti-Corrosion Epoxy Powder Coating/advanced powder coating Product Introduction:This product is formulated using epoxy resin and phenolic epoxy resin, designed and manufactured according to GB/T 23257-2009....
High-Performance Metal Bonding Powder Coating
High-Performance Metal Bonding Powder Coating Introduction A specialized upgrade of metallic powder coatings, designed to eliminatepigment separationandbatch inconsistencyissues throughoptimiz...
Sand grain metal MT-049/77578
Sand grain metal MT-049/77578 Introduction No. MT-049/77578 Color Xuanyou (grey) Surface Sand grain metal System Polyester Scope of applicatio...
Talcum Powder Fintarque M05N
Talcum Powder Fintarque M05N GENERAL INFORMATION Talcum Powder Fintarque M05N is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are pu...
供应产品

Same products

Easy-cleaning Silicone-Modified Waterborne UV Resin
Easy-cleaning Silicone-Modified Waterborne UV Resin 卖方: Guangzhou Human New Material Science and Technology Co., Ltd LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
Water-based Soft-Touch Resin for Consumer Electronics
Water-based Soft-Touch Resin for Consumer Electronics 卖方: Guangzhou Human New Material Science and Technology Co., Ltd Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
Conformal Coatings
Conformal Coatings 卖方: Guangzhou Human New Material Science and Technology Co., Ltd The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
Metalized & Laser Transfer coating
Metalized & Laser Transfer coating 卖方: Guangzhou Human New Material Science and Technology Co., Ltd Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
Hydrophilic coatings for Air Conditioner
Hydrophilic coatings for Air Conditioner 卖方: Guangzhou Human New Material Science and Technology Co., Ltd A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...