Sucker Rod Centralizer
Sucker rod centralizeris a kind of downhole toolswhichis pumping wellanti-abrasion, it is especially suitable for pumping well and directionalwell whcih above of sucker rod middle point,under the middlepointof sucker rod , the rod body with nylon centralizer is works better.
The sucker rodmoves up and down in the tubing, due to the elastic deformation of sucker rod, rod and oil tube wall is easy to makefriction, ti makes sucker rod break off easily, sucker rod centralizer has strong flexibility, touchedwith the tubingwall can reduce the friction of rod and tube, and can be increase production life of pumping unit.The centralizer is connected with sucker rod , the outsid diameter of centralizer is bigger than coupling outer diameter,so that can make the function of centralize. Thecentralizer is made ofhigh strength wear-resistant material, andtouched with the tubingtoreduce the abrasionto achieve the purpose of anti-abrasion.
oil equipment Centralizer
CHEMICAL COMPOSITION
Process Sucker Rod Centralize:
- ℃.
- ℃hot air, making its humidity less than 0.1%.
- ℃, and the mold temperature of the processed HTN53G50HSLR is 100℃.
- ℃, plasticizing area one temperature is 285 ℃,plasticizing area two temperature is 275 ℃, plasticizing area three temperature is 260 ℃, injection pressure is 110 bar, flow is 90 cc/min.
PA66
Item |
Specification |
Technical Requirements |
PA66 |
1 |
Testing Item |
Smooth and Without Damage |
Smooth |
2 |
Bending StrengthMpa |
≧103 |
|
3 |
Notch Impact Strength |
≧13 |
|
4 |
Friction Coefficient μ |
≦0.018 |
|
5 |
Heat Distortion Temperature ℃ |
≧180 |
|
6 |
Wear Volume Loss g/cm³ |
≧0.073 |
|
7 |
Density kg/cm³ |
||
8 |
Tensile MPa |
||
9 |
Compactness |
1500 |
PPA Resin
Item |
Specifications |
Technique Data |
PPA Resin |
1 |
Appearance |
Smooth and Without Damage |
Smooth |
2 |
Bending StrengthMpa |
≧103 |
|
3 |
Notch Impact Strength |
≧13 |
13 |
4 |
Friction Coefficient μ |
≦0.018 |
|
5 |
Heat Distortion Temperature ℃ |
≧180 |
|
6 |
Wear Volume Loss g/cm³ |
≧0.073 |
|
7 |
Density kg/cm³ |
||
8 |
Tensile MPa |
||
9 |
Compactness |
1500 |
Found PetroleumEquipment Co., Ltd.Mill Test Certificate:
Product |
Centralizer |
Pcs |
2 |
Delivery |
Certidicate No. |
F20150116 |
|||||||
Company |
Found Petroleum Equipment Co., Ltd. |
Contract No. |
/ |
||||||||||
/ |
Specification |
API 10D |
|||||||||||
Aperance Testing |
|||||||||||||
Size |
Pcs |
Outside Diameter |
Inner Diameter |
Length |
|||||||||
7/8" |
1 |
58mm |
7/8" |
200mm |
|||||||||
7/8" |
1 |
58mm |
7/8" |
200mm |
|||||||||
Tensile test |
|||||||||||||
Material |
Standard Value |
Temperature- resistance |
HRC |
Impact Strength |
Compressive Strength |
||||||||
0℃-200℃ |
M85-M114 |
70-100Mpa |
|||||||||||
HTN51G35HSLR |
Measured Value |
176℃ |
93 |
92 |
|||||||||
HTN53G50HSLR |
Measured Value |
187℃ |
98 |
88 |
|||||||||
Note: 1. A certificate to the original shall be prevailed, copy is invalid. 2. Item to write clearly, and do a single code. 3. There are ten days of feedback, and timely service. 4. Implement of API 10D standard, the warranty period of one year. |
Issued by |
||||||||||||
Auditor |
在线联系供应商
Other supplier products
high strength sucker rod for sale | shares that in oil drilling, a drill tool is used to break up rock and drill into the ground to drill holes of specified depth for oil or gas produ... | |
Grade HY Sucker Rod On Sale With Good Price | Grade HY Sucker RodOn Sale With Good Price Grade HY Sucker Rod DescriptionGrade HY Sucker Rodwith factory price If you have any question on Grade ... | |
oilfield drill pipe | oilfield drill pipe Drill pipe plays a decisive role in the process of drilling, it transfered the drilling torque to drill bit, inordertodrilling... | |
Sucker Rod Centralizer | Sucker rod centralizeris a kind of downhole toolswhichis pumping wellanti-abrasion, it is especially suitable for pumping well and directionalwell ... | |
high torsion strength | If you have any question on Grade Hy Sucker Rodand Api Solid Sucker Rods. We will give the professional answers to your short questions. Grade HY S... |
Same products
KLUBER LECTRIC KR 44-102 1KG Grease | 卖方: 广东聚广恒自动化设备有限公司 | “LUBE FS-2-7 700G” LUBE FS-2-4 400G LUBE FS-2-2 200G LUBE FS-1-7 700G LUBE MY-2-7... | |
KLUBER ISOFLEX TOPAS NCA52 75G Grease | 卖方: 广东聚广恒自动化设备有限公司 | 1 Three Bond 2706 Oil &Grease Removing Agent 420ML/PC10PC/Carton 2... | |
Kluber ISOFLEX TOPAS L 32CN 1KG Grease for Pick and Place Machine | 卖方: 广东聚广恒自动化设备有限公司 | “LUBE FS-2-7 700G” LUBE FS-2-4 400G LUBE FS-2-2 200G LUBE FS-1-7 700G LUBE MY-2-7... | |
BQH 72-102 grease 1KG for Pick and Place Machine | 卖方: 广东聚广恒自动化设备有限公司 | NSK LR380G/PC 20PC,50PC/Carton NSK AS280G/PC 20PC,50PC/Carton NSK LG280G/PC 20PC,50PC/Carton N... | |
LDS 18 1kg kluber Lubricants for SMT Machine | 卖方: 广东聚广恒自动化设备有限公司 | NSK Ns7 K3035K Grease for FUJI Nxt Machine NSK Lr3 Bearing Grease K48-M3851-10X NSK LG2 Grease ... |