.

main rib drill pipe

How to maintain the phenomenon of wear of the main rib drill pipe? Shared by.

In ultra-deep Wells, high-slant Wells, long-displacement Wells and horizontal Wells, the drilling time of the main frame drill pipe is prolonged and the lateral force of the drill string acting on the casing is increased, so the friction and wear problem of the casing and the drill string is more and more prominent. The direct result of serious wear is rapid wear of drill string, which leads to premature failure. Casing wear can reduce the extrusion strength and internal pressure strength of the casing string, resulting in collapse, deformation and leakage of the casing string. In serious cases, the whole well will be scrapped. It will not only affect our mining work, but even pose a threat to the safety of workers. In view of this problem, our maintenance technicians have come up with some solutions.

The application of body ribhas been not limited to the coal mining industry. Now, many industries will use body rib drill pipe, and the damage of body rib drill pipe joints in many places is relatively serious, and the friction between the joints and casing of some supporting equipment of the drill pipe can not be ignored.

Ofand casing friction and wear mechanism, triggered a series of problems and their prevention measures were studied, the research content mainly includes: to study the mechanism of tool joint and casing friction and wear, the joint under different load were studied using finite element method (fem) of contact pressure between casing and distribution, and established the mathematical model of the maximum contact pressure and wear. The analysis results can well explain the principle of reducing casing wear of drill pipe joint by single and double welding and hardening belt, and provide theoretical basis and technical basis for the technology of welding and hardening belt of drill pipe joint. This paper makes an in-depth theoretical analysis and experimental research on the friction and thermal cracking of drill pipe joints, expounds the mechanism and process of the thermal cracking failure of drill pipe joints, and puts forward some measures to reduce or prevent the thermal cracking failure of drill pipe joints.



在线联系供应商

至: Found Petroleum Equipment Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Tapered Thread Sucker Rod
Tapered Thread Sucker Rod Tapered Thread Sucker Rod It is a sucker roddesigned specially for the PCP pump, and the taper thread is designed according to the drill pipe thre...
Heavy duty sucker rod
Heavy duty sucker rod Heavy duty sucker rod shares that the weight bar provides a stable center of gravity for the bar above the pump, keeping it vertical and firm to re...
Rebirth door for scrapped rod
"Rebirth door" for scrapped rod "Rebirth door" for scrapped rod The following shared by. What process does a discarded rod use to make it new and usable? A few days ago,4 Nigerian...
 oilfield drill pipe
oilfield drill pipe oilfield drill pipe Drill pipe plays a decisive role in the process of drilling, it transfered the drilling torque to drill bit, inordertodrilling...
 oilfield drill pipe
oilfield drill pipe oilfield drill pipe Drill pipe plays a decisive role in the process of drilling, it transfered the drilling torque to drill bit, inordertodrilling...
供应产品

Same products

三牙轮钻头制造商 406.4mm IADC537 镶齿牙轮钻头
三牙轮钻头制造商 406.4mm IADC537 镶齿牙轮钻头 卖方: 河北亿川钻井设备制造有限公司 基本参数钻头尺寸 16"(406.4MM)IADC 代码 537连接 7 5/8"API reg pin转速(rpm) 110~40钻头重量(KN/MM) 0.5~1.05地层 低抗压强度,中硬...
硬质合金爪具
硬质合金爪具 卖方: 株洲弘通硬质合金有限公司 碳化钨爪式卡盘刀片作为夹持器 由于碳化钨材料具有较高的硬度和强度,因此其耐磨性非常好。 它们被广泛应用于许多不同的行业和应用,甚至每天都在发生一些新的应用。 我们拥有丰富的经验和技术诀窍工程师...
api 4 1/2 钢齿钻头全开中心 8 3/4三牙轮钻头
api 4 1/2" 钢齿钻头全开中心 8 3/4"三牙轮钻头 卖方: 河北亿川钻井设备制造有限公司 基本参数钻头尺寸 8 3/4"(222MM)IADC 代码 127齿型钢/磨齿轴承类型 弹性体密封轴承连接 4 1/2"API reg pin转速(rpm) 180~80钻头重量(KN/MM) ...
16 英寸 IADC 537 tci 三牙轮钻头
16 英寸 IADC 537 tci 三牙轮钻头 卖方: 河北亿川钻井设备制造有限公司 基本参数钻头尺寸 16"(406.4MM)IADC 代码 537连接 7 5/8"API reg pin转速(rpm) 110~40钻头重量(KN/MM) 0.5~1.05地层 低抗压强度,中硬...
11 5/8英寸TCI牙扣三锥钻头中国制造低价
11 5/8英寸TCI牙扣三锥钻头中国制造低价 卖方: 河北亿川钻井设备制造有限公司 钻头尺寸 295.3毫米IADC 代码537连接 6 5/8“ API reg喷嘴数量 3NZ弥补扭矩(KN.m)16.3〜21.7运行参数转速(rpm)80〜40钻压(KN / M...