Automatic Cleveland Open-Cup Flash Tester FDT-0131
FDT-0232Automatic flash point tester of petroleum products (Pensky-Martens closed cup method)
Applied standards: GB/T 261-2008, ASTM D93-02
Application range: applies to the determination of flash point of petroleum products. This product
can measure the flash point of petroleum products in the range of 40-370℃ as
required by the standards.
Features
1, according to GB / T 261-2008 standard for different types of samples A and B two experimental procedures to choose from;
2, innovation introduced the U.S. imports XECOM data processing chip, fast and accurate processing of the data;
3, innovative use of the furnace tilting system automatically experiment after the furnace cooling rate faster greatly shorten the time interval between the repeated experiments;
4, the instrument has a self-diagnostic function, automatic prompts to equipment failure;
The instrument has self over-temperature protection, over-temperature range can be arbitrarily set;
6, color liquid crystal display, real-time simulation of real-time trace shows a function of time warming up and test curve, operator interface prompts; Specifications
1 Power supply: AC 220V ± 10%, 50Hz
2, range: room temperature ~ 300 ° C;
3, Repeatability: ≤ 2 ° C;
4,Reproducibility: ≤ 4 ° C The visibility: 0.1 ° C;
5, Accuracy: 0.5 ° C;
6, heating rate: meet GB/T261-2008 standard
7 Ignition way: electronic ignition gas flame
8, to adapt to the environment temperature :10-40 ° C;
9, adapt to the environment humidity: <85%
10 Total power consumption: not more than 300W
Other supplier products
|
|
oil density Tester FDT-1531 |
Application range
The instrument for the national initiative, instead of the original paper recorder, the instrument uses LCD touch screen automat... |
|
|
Automatic flash tester of petroleum products (Cleveland open cup method) |
Application range
Oil emulsion breaking analyzer is manufactured according to national standards GB/T7605 and GB/T7305 provisions of design, for ... |
|
|
变压器油氧化安定性测定仪 FDH-1001 |
Iubricating grease and malthenes needle penetration tester FDH-4501
Applied standards: GB/T269-91、ISO2137-85、ASTMD217-82、IP50-79
Application range... |
|
|
oil density Tester FDT-1531 |
Application range
Applicable in accordance with the standard GB/T6536-1997,Petroleum products - Determination of distillation,Regulations as wel... |
|
|
oil density Tester FDT-1531 |
Application range
Ash analyzer of petroleum products to the requirements specified in the design and manufacture in accordance with the national st... |
供应产品
Same products
