Petrochemical Nuts And Bolts
The standard refers to the American ASTM or ASME standard with new and unique technical clauses added, which is suitable for a type of petrochemical fasteners used in high temperature and high-pressure environments, including bolts, studs, nuts, etc.
The mechanical properties and materials specified in GB/T3098/8 "Mechanical Properties of Carbon Steel Fasteners Part VIII Heat-resistant Threaded Connections" are suitable for fasteners that can withstand high temperature, alternating loads, and to a greater extent. Be sure to tighten the axial force.
High temperature and high-pressure petrochemical fasteners- commodity fasteners and special fasteners
- wind energy fasteners:
- The type and size of hexagon head bolts meet the requirements of GB/T5782, A and B grades. The mechanical properties of these petrochemical fasteners refer to the performance grades of carbon steel bolts according to GB/T3098/1 standard: A2-50, A4-50, A2-70, A4-70;
- The nut type conforms to GB/T6170 I-type nut and special nut (pipe flange nut). Its mechanical properties refer to the performance grades of carbon steel according to the GB/T3098/2 standard: grades 6 and 8; the performance grades of stainless steel nuts of GB/T3098/15 are A2-50, A4-50, A2-70, A4-70 ;
- Fasteners:
- In order to be suitable for the conditions of high-temperature resistance, low-temperature resistance, and environmental corrosion resistance, formulate suitable special fasteners, such as full-threaded studs for pipe flanges, in accordance with the provisions of GB/T901. The dimensions of hexagon head bolts and nuts shall be carried out according to national standards.
- Selected materials (grades) include medium carbon alloy steels: 35CrMo (applicable temperature +100-525℃); 25Cr2MoV (applicable temperature>-20--575℃); 42 CrMo (applicable temperature +100-525℃). The strength is between 690~890Mpa, that is to say, the medium carbon alloy steel is tempered at high temperature (550℃<=tempering temperature<=600℃) to obtain comprehensive mechanical properties to meet the service of high-temperature environment.
- Stainless steel materials selected are: 0Cr18Mi9 (applicable temperature -196--800 ℃); 0Cr17Mi12Mo2 (applicable temperature +196--800 ℃); the strength of stainless steel material obtained by solution treatment is between 690~890Mpa, and the performance level is A2- 70 A4-50 A4-80 grade.
- Using American standards, using stainless steel grades and materials: ASTM A193 B8 CL.2 (for temperature +196-525℃); A193 B8M CL.2 (for temperature +196-525℃); A453660 (for temperature +29- 525℃); also includes A320L7 suitable for low temperature and high-pressure environment (applicable temperature -100℃).
- Special grade nut material (grade) can choose medium carbon alloy steel: 30CrMo, 35CrMo; guaranteed load
There are many fastener manufacturers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
Reinforced Silicone Rubber Sheet | Silicone fiberglass cloth has superior heat resistance (long term temperature of 200 degrees), cold resistance (long term -40 degrees), anti-aging,... |
 |
Roundup Toaster Conveyor Belt | Conveyor belt toaster ovenare structured by woven glass fiber fabric coated with silicone which is non-toxin and food grade. The material offers te... |
 |
PTFE Antistatic Sheet | Microwave gasket, oven slice, food drying, heat sealing, frozen food transportation, defrosting belt, drying belt. Adhesive belt, transfer print... |
 |
UV Dryer Screen Printing Conveyor Belt | Aokai UV screen print conveyor dryer belt4 * 4 mesh, non-standard customized according to various sizes, and the base material is aramid fiber S... |
 |
PTFE Coated Fiberglass Fabric | According to the impregnation amount of fluorine resin or the thickness of fiber cloth used, it is divided into various specifications. The ptfe c... |
Same products
 |
NSF H-1 Food Grade Fluorine PFPE Grease for Chemical and High Temperature, Extreme Pressure | 卖方: 东莞市唯能新材料科技有限公司 | ●NSF H1 certificatedas non-toxic and no stimulating or volatile chemical materials; ●Great cost p... |
 |
Food Grade Silicone Grease with PTFE for O-rings Bearings Gears | 卖方: 东莞市唯能新材料科技有限公司 | ●Silicone base oil, provides long-lasting lubrication in humid environments; ●With PTFE added, g... |
 |
NSF H-1 Food Grade Silicone Grease for O-rings | 卖方: 东莞市唯能新材料科技有限公司 | ●Great performance of long-term lubricating in humid environment; ●Adopted hydrophobic thickener... |
|
|
Petrochemical Nuts And Bolts | 卖方: Jiangsu Aokai New Material Technology Co., Ltd | The standard refers to the American ASTM or ASME standard with new and unique technical clauses a... |
 |
sillicon carbide | 卖方: 振洹冶金耐材有限公司 | Silicon carbide Silicon carbide is made of quartz sand, petroleum coke (or coal coke), wood chips... |
