Нефтепродукты перегонки анализатор FDR-0841
Mechanical impurities of petroleum products tester FDR-2001Application range
Mechanical impurities of petroleum products and additives analyzer is designed in accordance with the national standards GB/T511 "petroleum products and additives Determination of mechanical impurities (gravimetric method) provides requirements applicable to the determination of the various types of light petroleum products, heavy oil, lubricants and additives mechanical impurities content.Features
1, take the warm-up, and test integrated structure design, reasonable structure, beautiful appearance, reliable quality.
2, circuit temperature control table to control electric heating plate temperature, so that the temperature of the heating plate thermostat controlled, in order to meet the test needs.
3, using a solid-state regulator regulating insulation funnel input voltage, thereby controlling the size of the heating power to achieve the purpose of heating required insulation funnel.
4, filtration devices connected by a vacuum pump and filter flask fully protected difficult to filter the sample measurement.Specifications
1 Power supply: AC 220V ± 10%, 50Hz.
2, water bath heating power: 1000W.
3, the water bath temperature control range: room temperature ~ 90 ℃ adjustable.
4, the water bath temperature display: LED digital display.
5, the water bath temperature control accuracy: ± 1 ℃.
6, funnel Temperature range: room temperature ~ 90 ℃ adjustable.
7, funnel Temperature Display: LED digital display.
8, the funnel temperature control accuracy: ± 2 ℃.
Dimensions: control box 390 (L) x 260 (width) × 590 (H);
Water bath 90 (L) x 290 (width) x 370 (H).
10, the ambient temperature: ≤ 35 ℃.
11, relative humidity: ≤ 85%.
12 Total power consumption: not more than 1200W.
Other supplier products
|
|
变压器油氧化安定性测定仪 FDH-1001 |
Automatic benzene distillation range tester FDS-0571
Application range
The benzene distillation range meter applicable standard: GB/T3146
Feature... |
|
|
Automatic flash tester of petroleum products (Cleveland open cup method) |
Oil and synthetic liquid break emulsification tester FDT-0801 Application range Oil emulsion breaking analyzer the demulsibility assay is based on ... |
|
|
FDH-0601-直馏润滑油氧化安定性测定仪 |
【产品简介】
直馏润滑油氧化安定性测定仪依据SH/T0185要求设计制造，将两根装有试样的氧化管放入温度为120度的加热浴中通氧48H，挥发性酸由流动的氧气吹出，被水吸收。氧化结束后需要测定挥发性酸值、可溶性酸值以及油中沉淀物的含量。氧化安定性由总氧化产物的百分数表示。
【详细说明】
功... |
|
|
copper corrosion analyzer LPG FDS-0301 |
Application range
LPG copper strip corrosion tester for liquefied petroleum gas corrosive to copper measured According to SH/T0232-92 ，(LPG co... |
|
|
FDT-0431 |
产品名称： 全自动凝点、倾点测定仪
产品型号：FDT-0316
购买数量： 起订数量：1 购买
标签：凝点、倾点、浊点、冷滤点、冰点、结晶点、低温特性、低温性能
适用范围
全自动凝点、倾点测定仪按国家标准GB/T510、GB/T3535《石油凝点•倾点测定法》规定设计制... |
供应产品
Same products
