Contact Adhesive
SBS999 type is a synthetic rubber-based, adding tackifier resins, accelerators, antioxidants, stabilizers, organic solvents, such as by a special process refined from volatile one-component drying adhesive. Most of the imports of raw materials, based on its excellent quality and good construction performance, much of the building decoration industry of all ages, has become the main domestic and international construction decoration industry with glue.
Used for:
1. SBS999 can be used for wood, plywood, fire board, MDF, polymer plates, Mianqi board, aluminum plate and other sheet metal bonding between;
2. SBS999 can also be used for interior decoration, art advertising, automotive interior. Especially for high-grade villas, luxury hotels, Fortune Plaza, the noble district, the headquarters base and other high-grade, strict requirements of the refined decoration.
Performance and features:
1. Selection rigorous, glue density is small, brushing area 30% larger than ordinary glue.
2. The environmental indicators are much better than the national standard, in line with "Olympic environmental guidelines."
3. Solid content of high, saving glue at the same time does not affect the bonding effect.
4. Super-strong initial adhesion.
5. Transparency, good smell, in line with China's environmental labeling product certification, the proper use does not affect human health.
Packing:
15L × 1 barrel; 3L × 6 barrels per CTN
How to use:
1. The adhesive surface of the grease, dirt and other dirt wipe, and then fight the hair dry.
2. With the scraper or brush in the adhesive surface from the inside out evenly coated (if a large area of bonding, it is recommended in the two adhesive surface at the same time glue), room temperature, dry 10 to 30 minutes (depending on the construction Temperature and humidity may be, with a layer of slightly sticky hands shall prevail).
3. Once the alignment surface, from the inside out (squeeze out bubbles), with a rubber hammer or wood hammer percussion compaction, 24 hours after the use of strength can be achieved.
4. SBS999 mainly used in interior decoration, should not be used in the outdoors where the sun straight. If it must be used outdoors, it should be fully dry glue curing, usually 72 hours (23 ºC); such as direct outdoor construction, you should take the necessary measures to avoid the dark until the full dry curing before use. If used at low temperatures, should also make the glue fully dry curing.
5. As the market a wide variety of adhesive materials, the normal method of bonding is not some special adhesive materials, such as bonding the larger density of the MDF, it should be the second MDF construction: first In the infiltration of large and need to glue parts of the brushing glue to fully dry hardening (about 30 minutes), then the normal method of construction. This will be able to penetrate the larger density of the MDF and other materials firmly bonded together.
6. Depending on the adhesive material per square meter of glue is about 170 grams to 240 grams.
Note:
1. The product is three types of dangerous goods, ventilation should be used when the fire.
2. Keep out of reach of children.
3. Store and transport away from fire and heat, is strictly prohibited sun exposure; according to the inflammable goods storage transport, the use of empty packaging barrels withNote that fire prevention.
4. SBS999 mainly used in interior decoration, should not be used in the outdoors where direct sunlight, outdoor decoration, the best choice of other models of the company's products.
5. When you open the lid, press the cover surface, so as to avoid glue with pressure sprang.
6. Room temperature shelf life of 18 months, more than shelf-life, such as glue is not bad, you can still use.
7. Adhesive aluminum composite panels, fireproof panels and other dense material, the need to drill a number of holes in the substrate, so as not to stick after the drum package.
8. Outdoor use, the adhesive seam to use plastic potting to deal with plastic, so as not to seepage open glue.
9. Due to the difference of construction environment and applicable materials, it is recommended to determine the applicability of the product through experiments. The Company will not be responsible for the loss caused by the user's untested or violation of the technological requirements.
The implementation of standards:
Q / CQS010-2007
Other supplier products
|
|
Mildew Silicone Sealant |
1) Product Description: The product is one-component, neutral room temperature curing silicone mold sealant. 2) Basic Uses: Kitchen, bathroom and ... |
|
|
Panel Glue |
1) Features: Panel glue is green water-based product certified by China Environmental Labeling Product Certification and ISO14001 Environment Syste... |
|
|
Curtain Wall Glue |
Overview: This product is a single component, neutral room temperature curing high-quality curtain wall silicone weathering sealant. Scope of appl... |
|
|
Packaging Stickers Glue |
1) Features: Packaging stickers glue is through the China Environmental Labeling Product Certification and ISO14001 environment system certificatio... |
|
|
Big Slabs Glass Glue |
Overview: The product is a single component, acid fast curing at room temperature, high-speed viscous type, professional glass and other structural... |
供应产品
Same products
