Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB
SPECIAL FEATURES OF GOLOHO-324C-AB
1:1
Two-part, 1:1 mix ratio
Low viscosity
Room temperature accelerated cure, no small molecule release
Suitable working time at room temperature
Excellent adhesion and self-healing
Excellent stability at 200℃ high temperature
GOLOHO-324C is a two part silicone gel
APPLICATIONS OF GOLOHO-324C-AB
Suitable for sealing and protecting various high purity electronic devices
Especially protection of sophisticated and mixed circuit
TECHNICAL DATA OF GOLOHO-324C-AB(THESE VALUES ARE NOT THE ULTIMATE PROPERTY PERFORMANCE, FOR REFERENCE ONLY)
|
Model |
GOLOHO-324C-AB |
|
|
Uncured |
||
|
Appearance |
A |
Colorless transparent |
|
B |
Colorless transparent |
|
|
Specific gravity |
A （25℃）g/cm3 |
|
|
B （25℃）g/cm3 |
||
|
Viscosity |
A (25℃)cps |
400~600 |
|
B (25℃)cps |
400~600 |
|
|
A/BMix ratio ratio(weight) |
1:1 |
|
|
cPMixed viscosity |
450~550 |
|
|
（25℃,60%RH）minWorking time |
60 |
|
|
Cured |
||
|
Cure time at 25℃ |
6 |
|
|
Heat cure time at 60℃ |
30 |
|
|
Heat cure time at 130℃ |
10 |
|
|
Hardness |
15 |
|
|
Penetration |
20mm/10s |
|
|
Linear CTE (by TMA) |
350ppm/℃ |
|
|
Volume resistivity |
5×1015 |
|
|
Dielectric strength |
twenty one |
|
CAUTIONS OF GOLOHO-324C-AB
To ensure all the protected surfaces be clean and dry
The two components should be thoroughly mixed at a 1:1 ratio by weight or volume, a vacuum encapsulation for 5~10min is recommended(10~20mm Hg)
Working time is defined as the time required for viscosity to double after mixing followed by recommended ratio in 2h at room temperature
To eliminate any air introduced during dispensing or trapped, a vacuum encapsulation is recommended, especially for complex shape circuit
SPECIAL NOTES OF GOLOHO-324C-AB
Don't contact with the following materials specially in the process of using, otherwise it will cure incompletely or even not cure.
Organotin
Organic silicone with tin
Sulfides
Amide, polyurethane, amide, azido components
HEALING QUALITIES OF GOLOHO-324C-AB
Good healing qualities and pressure sensitive adhesive performance for itself, so it can keep consistent between repairable adhesive materials and the whole
PACKING INFORMATION OF GOLOHO-324C-AB
In general, 18kg+18kg package
STORAGE AND SHELF LIFE OF GOLOHO-324C-AB
Storage at room temperature 12 months shelf life in unopened container
SAFETY NOTES OF GOLOHO-324C-AB
Reference in the corresponding material safety data sheets
FOR USERS OF GOLOHO-324C-AB
Without notice, the contents of this article may be changed due to the product performance improvement and specification.
We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
Our products are developed for general industrial use.
The data are real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before user's applying. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensures the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there is any quality problem. GOLOHO POLYMER will provide replacement or refund if any quality problem confirm. Users should be responsible for ensuring that their applications comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO POLYMER does not undertake any responsibility for any safety and loss problems.
Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: ; for more details, please visit web site:
GOLOHO POLYMER was founded in China, setting up factory to develop and produce rtv grease.Now the company embraces united and dynamic team, experienced R&D center, advanced detection method, strong manufacture capacity as well as customer-oriented service. We sincerely invite and welcome people from all around the world to invest and create more values
在线联系供应商
Other supplier products
 |
Heat Resistant Silicone Adhesive/Sealant - 3912R | High temperature rubber sealant- 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532) ·One-part RTV silicone rubber &midd... |
 |
Thermally Conductive Silicone Adhesive - 2752 | Thermally Conductive Silicone Adhesive - 2752 FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance RTV silicone thermal conductivityadhesive &... |
 |
Heat Resistant Silicone Adhesive/Sealant - 3912R | heat resistant silicone glue/Sealant - 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532)·One-part RTV silicone rubber&... |
 |
High Performance Silicone Adhesive/Sealant - 3334 | FEATURES OF heat and water resistant sealantheat proof silicone adhesive- 3334 Convenient: one-part, deoximation, rapid cure at room temperature Ne... |
 |
RTV-1 Silicone Rubber | RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. It can be also... |
Same products
 |
Battery Pack | 卖方: Eco Power Group | Modular custom lithium battery packfrom Eco Power is developed to meet the highest safety and cer... |
 |
Battery Module | 卖方: Eco Power Group | lithium battery modulefrom our lithium iron phosphate battery suppliers is the serviceable unit b... |
 |
LYY48100 STACK MOUNT BATTERY | 卖方: Huizhou Liyuan New Energy Co., Ltd | These are Stackable Modular Battery 48V/51.2V 5KWH 10KWH 20KWH 30KWH 40KWH 50KWH LiFePO4 Battery ... |
 |
dTMP·Free Acid | 卖方: WUHU HUAREN SCIENCE AND TECHNOLOGY CO., LTD. | CAS NO. 365-07-1 2 deoxythymidine 5 monophosphateFree Acid For more information about 33430 6... |
 |
Round Duct Lock Forming Machine | 卖方: Anhui Blackma Heavy Industrial Machinery Co.,LTD | Round Duct Lockformer MachinePerformance Features: Model Max thickness(mm) Pow... |
