Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
FEATURES OF GOLOHO-4313-AB
Flammability,UL-94V0 certificationExcellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivityMix ratio 1:1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module.Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within.rtv grease
- Description
GOLOHO-4313(W)-AB is atwo part silicone adhesiveflame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .
HOW TO USE GOLOHO-4313-AB
- Stirred thoroughly before mixing
- Mixed in 1:1 ratio by weight
- Agitation: mixed thoroughly by low speed agitation
- Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
- Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
- Curing 1:curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
- Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes
在线联系供应商
Other supplier products
 |
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB | FEATURES OF GOLOHO-4313-AB(also called two part silicone adhesive) Flammability,UL-94V0 certification Excellent resistance to high and low temperat... |
 |
Addition Silicone Rubber | Addition Silicone Rubber GOLOHOproduces no by-productsrtv greasein the curing process, allowing their use in deep section and complete confinement.... |
 |
Conformal Coating | Liquid metal conformal coating Conformal coating application techniquesis a thin transparent polymeric coating applied to PCB’s to provide pr... |
 |
Thermally Conductive Silicone Adhesive - 2752 | FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance RTV thermally conductive rtv silicone adhesive · Excellent thermal conductive, hea... |
 |
RTV-1 Silicone Rubber | RTV-1 siliconeis a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone ... |
Same products
 |
OSi PEMS 57 CAS 70914-12-4 | 卖方: OSi Holding Limited | Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene... |
 |
LC12 Two-Component Solvent Free Silicone Conformal Coating | 卖方: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
 |
LA-17 Polyether Modified Short Chain Polysiloxane | 卖方: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
 |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | 卖方: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
 |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | 卖方: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
