Light/Moisture Cure Conformal Coating-L213
FEATURES OF GOLOHO-L213
UV rapid cure
secondary moisture cure
one-component, 100% solid content
low viscosity
-55℃~120℃ temperature resistance: -55~120℃
GOLOHO-L213 is a single component, UV-moisture curable, acrylated polyurethane conformal coating
TYPICAL APPLICATIONS OF GOLOHO-L213
Coating and protection on the complex shape of PCB and integrated circuit
HOW TO USE GOLOHO-L213
As it is sensitive to light, these kinds of light like sunlight, UV, artificial light must be controlled to decrease its exposure during storage and handing process.
All surface in contact with the material should be clean and free from impurity, grease, or other contaminants prior to dispensing the material to acquire expectant results
Application methods: artificial brush, mechanic spray, dip
Cure: proper length wave UV light is needed to achieve constant depth of cure, and the cure time depend on the lamp intensity and distance from the source
Some temperature sensitive substrate should be cooled before rtv silicone coating.
SPECIAL VERSION OF GOLOHO-L213
The product is nontoxic after curing, but avoid contact with skin. If contact the compound with eyes, rinse immediately with plenty of water
Shelf life and storage conditions
Shelf life: in sealed original containers 12 months at 5~25℃
Storage: protect from UV light, protect against humidity
FOR USERS
Without notice, the contents of this article may be changed due to the product performance improvement and specification.
We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
Our products are developed for general industrial use.
The data are real expression in the existing test methods and results of GOLOHO POLYMER in this paper. However, because of the uniqueness of every application, the product information can never replace necessary testing before user's applying. The user's test results are the only way to ensure the product is suitable for their specific application requirements. Therefore, unless a written guarantee, GOLOHO POLYMER only ensures the products comply with the factory specifications. GOLOHO POLYMER never recognizes any other form of guarantee and claim clause. GOLOHO POLYMER has the right to test again for product quality if there is any quality problem. GOLOHO POLYMER will provide replacement or refund if any quality problem confirm. Users should be responsible for ensuring that their applications comply with local safety regulations and obtain the necessary certifications and recognition. GOLOHO POLYMER does not undertake any responsibility for any safety and loss problems.
Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: ; for more details, please visit web
Goloho-Company
GOLOHO Polymer Materials (Changzhou) Co., Ltd. has founded in 1995. It is a leading enterprise in China which manufacture industrial adhesives, such as RTV silicone, grease and conformal coating. Which are widely used in new energy, rail transportation, photoelectric display, electrical electronic equipments. After more than 20 years of development and technology accumulation, GOLOHOmasters the leading technology, production process and the strict quality management system. It has approved ISO 14001:2004 GOLOHO has built the factories and R&D centers in Shenzhen, Guangdong and Changzhou, Jiangsu, winning the most of the community and the customer recognition and praise. GOLOHO provides total solutions for customers at home and abroad with Safe, reliable and innovative high-tech products and comprehensive services.
在线联系供应商
Other supplier products
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | Two-Part, 1 To 1 Mix Ratio Transparenttwo part silicone gel- 324C-AB SPECIAL FEATURESOF GOLOHO-324C-AB 1:1Two-part, 1:1 mix ratioLow viscosityRoom ... |
 |
RTV-1 Silicone Rubber | RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone... |
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
 |
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB | FEATURES OF GOLOHO-4313-AB(also called two part silicone adhesive) Flammability,UL-94V0 certification Excellent resistance to high and low temperat... |
Same products
 |
Cipriani Gasketed Plate Heat Exchangers | 卖方: China Plate Heat Exchange Co., Ltd | Cipriani is a renowned manufacturer of gasketed plate heat exchangers. Their gasketed plate heat ... |
 |
Brazed Plate Heat Exchangers | 卖方: China Plate Heat Exchange Co., Ltd | Brazed plate heat exchangers are constructed with a series of thin, corrugated stainless steel pl... |
 |
Armstrong Heat Exchanger Plates | 卖方: China Plate Heat Exchange Co., Ltd | Armstrong heat exchanger plates provide full industry compatibility and offer a variety of materi... |
 |
Armstrong Heat Exchanger Gaskets | 卖方: China Plate Heat Exchange Co., Ltd | We supplies gasket spares for over 20 different models of Armstrong's Gasketed Plate Heat Excha... |
 |
Armstrong Gasketed Plate Heat Exchangers | 卖方: China Plate Heat Exchange Co., Ltd | The armstrong plate and frame heat exchangers incorporate a series of uniquely corrugated metal p... |
