F400-1K Primer Surfacer
1、F400-1K Primer Surfacer
Automotive Paints Supplier
Product Name/Model:F400-1KPrimer Surfacer
Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, easysanded
Substrates |
Dried and sanded existing finishes and putty. |
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
MixingRatio |
F400-1Kprimer surfacer |
Thinner |
1 |
1 |
|
A 、<15℃ :90 Fast Thinner; B 、 15-30℃:91 Standard Thinner; C、>30℃:92Slow Thinner |
||
SprayViscosity |
14-16s to drop off, in4# viscosity cup at 25°C, |
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
Drying Time |
Air-drying time 30 minutes, at 20°C. |
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
|
Package |
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. Not recommended to apply over large area.4. Not recommended for direct application over substrate of bare metal, stainless steel, aluminium,zinc, steel and wood.
在线联系供应商
Other supplier products
F400-1K Primer Surfacer | 1、F400-1K Primer Surfacer Automotive Paints Supplier Product Name/Model:F400-1KPrimer Surfacer Characteristic: Fast drying one-component 1K Pr... | |
F400-1K Primer Surfacer | Auto Coatings Product Name/Model:F400-1K Primer Surfacer Characteristic: Fast drying one-component 1K Primer Surfacer with strong filling power, e... | |
MSD Series Thinner | MSD Series Thinner Car Refinish Paint Product Name/Model:MSD Series Thinner Characteristic: High quality thinner, specially developed for primer, ... | |
MF-680 Extra Fast Clear Coat | MF-680 Extra Fast Clear Coat. Automotive Paint company Product Name/Model:MF-680 Extra Fast Clear Coat. Characteristic:Extra fast drying clear... | |
MF400-1K Primer Surfacer | 3、MF400-1K Primer Surfacer Automotive Paint company Product Name/Model:MF400-1K Primer Surfacer Characteristic: Fast drying one-component 1K P... |
Same products
Fast Dry Alkyd Antirust Primer (Iron Red, Gray) | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The fast-drying alkyd anti-rust paint is composed of alkyd resin and anti-rust pigments. Its surf... | |
Exterior Wall Paint | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Weather Resistant Acrylic Exterior Latex Wall Paint is a premium quality, water based 100% acryli... | |
DRINKING WATER TANK PAINT | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It ... | |
CHEMICAL PLANT PAINT | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a c... | |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion re... |