MF606-2K Primer Surfacer

Substrates

Dried and sanded existing finishes, all kinds of primer and putty.

SurfaceCleaning

Wash by warm soap, remove wax, silicon and other contaminations with degreaser,sanding with P800-P1000, wash with clean water then keep dry; again withdegreaser.

MixingRatio

MF606-2K Primer Surfacer

MF106 2K PrimerHardener

Thinner

4

1

1~1.5

＜15℃

MF606 2K Primer Surfacer

MF106 2K PrimerHardener

60 Fast Thinner

15-30℃

MF606 2K Primer Surfacer

MF106 2K PrimerHardener

61 Standard Thinner

＞30℃

MF606 2K Primer Surfacer

MF106 2K PrimerHardener

63 Slow Thinner

Pot-Life

At 20°C, 3 hours mixed with hardener, thinner

SprayViscosity

14-16s to drop off, in 4# viscosity cup at 25°C,

Spray GunSet Up

Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm ²

SprayTechnology

Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends ontemperature and paint film.

Drying Time

1. cool down.B. Air-drying time 3 hours, at 20°C.

Shelf Life

2 years in original sealed can, cool and dry place at 25℃.

Package

1L×12or3.75L×4