.

Epoxy Zinc-Rich Primer

Instructions of Epoxy Zinc-Rich Primer

It is two components epoxy zinc-rich primer heavy corrosion by a zinc primer, epoxy resin and other components. On steel surface treated to form a hard, wear-resistant, durable film, and provide long-lasting cathode protection.

Property of Zinc Rich Epoxy Primer Paint

Application of The Zinc Rich Epoxy Primer

Widely applicable to long-term anti-rust primer for steel primer, primer and maintenance, ships, bridges and other steel structures. Especially suitable for industrial, chemical, steel and other heavy-duty offshore matching primer coating.

Surface Preparation of The Epoxy Zinc-Rich Prime

The surface roughness of steel welds, rounded edges and clear the splash-melt welding, cleared the surface of the grease, oil and other pollutants; surface sandblasted to ISO standard Sa2.5 level or power tools rust St3 level; surface roughness of 50-85um, before spraying to ensure the surface is dry and clean.

The weather is good, the substrate temperature of not less than 5 ℃, relative humidity <85%. It must have good ventilation conditions in confined areas to ensure proper drying of the film. Before fully cured coating should not be exposed to oil, chemicals or mechanical stress.

Coating Application of Zinc Rich Epoxy Paint

Mixing mass ratio: Base material (A): The curing agent (B) = 10: 1.

Theoretical amount: 220 g / m2.

Painting passes: spraying or brushing 2 to 3, 60 to 80 microns dry.

Mixing: Use a power mixer component A (base) Stir, then stirring state by mixing ratio of the added amount of group B (curing agent), and fully mixed, while stirring continued momentum needed painting.

Thinner or Cleaner: For supporting diluent.

Curing time: After mixed directly.

After mixing pot life: 5 hours (23 ℃).

The Construction Method of Epoxy Zinc-Rich Prime

Brush: Recommended for small areas, acute sites and pre-coated and refinishing, but must meet the specified dry film thickness.

Spraying: airless spray or air spray, the airless spray is recommended priority.

Air spray: a discharge pressure 0.4-0.7Mpa, nozzle diameter 1.8-2.2mm;

Airless Spray: discharge pressure 15Mpa, nozzle diameter 0.43-0.48mm;

* When used in spray paint, because the need to adjust the viscosity, can be added to a thinner 0-10%.

Precautions

Shelf Life of The Epoxy Zinc-Rich Prime

Twelve months from the date of manufacture in the original unopened container at 32°C. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat or ignition.

Package: 20 kg/ barrel.

Contact us get more details about Epoxy Zinc-Rich Primer Coating, such as TDS, Application Method, OEM etc.



在线联系供应商

至: Fujian Ruisen New Materials Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Enhanced Anti-pollution Flashover Coating RTV-II
Enhanced Anti-pollution Flashover Coating RTV-II We offer different kinds of Station Post Insulator for Substation, Line Post Insulator, Disc Suspension Insulator, Hollow & Bushing Insulator, ...
Line Post Insulator
Line Post Insulator We can offer different Voltage of Line Post Insulatorfor Transmission Line. Such as Long Rod Insulator, Rod Insulator and Pin Type Insulator. Cont...
Multifunctional Insulator Cleaning Agent RS-10
Multifunctional Insulator Cleaning Agent RS-10 Multifunctional Insulator CleaningAgent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, esp...
High Voltage Insulator Coating Series
High Voltage Insulator Coating Series High Voltage Insulator Coating(HVIC) is used on excessive voltage insulators to forestall flashover and arcing, particular in severely contaminated...
Line Post Insulator
Line Post Insulator We can offer different Voltage of Line Post Type Insulatorfor Transmission Line. Such as Long Rod Insulator, Rod Insulator and Pin Type Insulator. ...
供应产品

Same products

PDC (Polycrystalline Diamond Compact) Cutter
PDC (Polycrystalline Diamond Compact) Cutter 卖方: Henan E-Grind Abrasives Co., Ltd. Polycrystalline diamond composite(PDC) E-Polycrystalline diamond composite(PDC) sheet is made of ...
Products
Products 卖方: Henan E-Grind Abrasives Co., Ltd. E-Grind offers a full range of superabrasive, diamonds and CBN powders, as well as a variety of s...
PCD & PCBN
PCD & PCBN 卖方: Henan E-Grind Abrasives Co., Ltd. PCD blanks for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purp...
Metal Bond Micron Diamond
Metal Bond Micron Diamond 卖方: Henan E-Grind Abrasives Co., Ltd. Metal Bond Micron Diamond E-Grind's metal bond micron products offer good Roughing, Lapping and ...
Metal Bond Mesh Diamond
Metal Bond Mesh Diamond 卖方: Henan E-Grind Abrasives Co., Ltd. E-Grind's metal bond mesh diamondcombines both using life and working efficiency.Suitable for res...