PCD & PCBN
PCD PCBN
E-Grind supplies the whole range of PCD blanks and PCDN blanks for cutting tool purpose. The largest Diameter of material PCDand PCDN materialblanks available can be 55mm. Our PCDcutting tool blanksand PCDN blanks provide high wearing resistance ability and high finishing surface.
Application of PCD MetalBlanks
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
Nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCD disc
|
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
|
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
|
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
|
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content＜12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
|
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
|
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
|
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content＞12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
|
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
|
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
√ |
|||||
|
55 |
√ |
|||||||
|
2μm |
For good surface finishing |
ET02 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
|||||||
|
5μm |
ET05 |
45 |
√ |
√ |
√ |
|||
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
√ |
√ |
√ |
||
|
55 |
√ |
√ |
||||||
|
302μm |
ET302 |
45 |
√ |
√ |
√ |
|||
|
55 |
√ |
√ |
||||||
|
35μm |
ET35 |
45 |
√ |
√ |
||||
|
55 |
√ |
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of PCBN:
1) Solid CBN
2) CBN with Tungsten Carbide supporting.
PCBN and SBN Grade
|
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
|
SBN95Z1 PCBN95Z1 |
20、30 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
|
|
SBN90Z PCBN90Z |
10、15 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
|
|
SBN90Z2 PCBN90Z2 |
10、15 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN80G |
3、5 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
|
|
SBN70G PCBN70G |
3、5 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
|
|
SBN60G |
1、3 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
|
|
SBN55G1 PCBN55G1 |
1、3 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
If you want to know more kinds of PCD productsand PCDN cutting tools, please visit our website.
E-Grind offers a full range of superabrasives, diamond and CBN powder, as well as a variety of superhard materials products to meet the needs of a wide range of industries.
Now the price of diamond diesis reasonable, anything you need, please contact us.
在线联系供应商
Other supplier products
 |
CBN Powder | The pcd wire drawing die blanksdiamond wire drawing diespcd wire drawing dieare produced under ultra-high temperature and ultra-high pressure. It c... |
 |
PCD & PCBN | E-Grind supplies the whole range of PCD blanks and PCD PCDNfor cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available c... |
 |
CVD Diamond | CVDdiamond(chemical vapor deposition diamond). The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and ... |
 |
Metal Bond Micron Diamond | Egrind’s metal bond micron diamond powderoffer good Roughing, Lapping and finishing result. For resin bond, vitrified bond, and electroplated... |
 |
Saw Grit Diamond | E-Grind's Saw Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, ... |
Same products
 |
D02 18% Protein Black Soybean Milk Powder (With Sugar) | 卖方: Heilongjiang Land Reclamation Dragon King Foods Co., Ltd. | D02 18% Protein Black Soy Milk Powder(With Sugar) are rich in magnesium, calcium and zinc. It has... |
 |
D01 18% Protein Black Soybean Milk Powder | 卖方: Heilongjiang Land Reclamation Dragon King Foods Co., Ltd. | Dragon King supplies outstanding quality D01 18% Protein black bean calcium soy milkPowder which ... |
 |
C42 40% Protein Instant Soybean Milk Powder | 卖方: Heilongjiang Land Reclamation Dragon King Foods Co., Ltd. | C42 40% Protein Instant Soyb MilkPowder Loading with various nutrients and and antioxidants, C... |
 |
C40 38% Protein Instant Soybean Milk Powder | 卖方: Heilongjiang Land Reclamation Dragon King Foods Co., Ltd. | Compared with regular soybean powder, C40 38% Protein instant soy milk powderis composed of more ... |
 |
C30 30% Protein Instant Soybean Milk Powder | 卖方: Heilongjiang Land Reclamation Dragon King Foods Co., Ltd. | C30 30% Protein Instant milk soy powderis popular with people who wants to lose weight, construct... |
