Powder coating primer containing zinc MT-PZ ALZ90F
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Overview
MT-PZ ALZ90F is azinc-rich epoxy powder primerdesigned to provide enhanced corrosion protection for mild steel. The primer combinescathodic protection and barrier effects, delivering superior performance in industrial and infrastructure applications. Optimized for steel substrates prepared via grit or shot blasting, MT-PZ ensures robust adhesion, uniform coverage, and long-term durability.
This primer is suitable formulti-layer protective coating systems, approved underQualisteelcoatstandards (Base Material: Steel PE-0097. 2-coat system up to C4-H) and is ideal for high-demand corrosion environments, including machinery, structural steel, and architectural components.
Key Features
Dual Protection Mechanism– Provides cathodic protection via zinc conductivity, combined with a dense epoxy barrier layer
Scratch Resistance– Specific anti-corrosive functionality maintains protection even in case of minor surface damage
Excellent Adhesion– Optimized for grit-blasted mild steel and pre-treated galvanized surfaces
Durable Performance– Resistant to corrosion, chemicals, and mechanical wear
Flexible Integration– Compatible with most epoxy, polyester, and PU topcoats
Powder Properties
| Property | Specification |
|---|---|
| Chemical Type | Thermosetting epoxy |
| Appearance | Smooth powder |
| Gloss Level (60°) | 45–65 units |
| Color | Grey (RAL7012 approximate) |
| Recommended Film Thickness | 70–120 μm |
| Density | 2.1 g/cm³ |
| Application Method | Electrostatic spraying (corona) |
| Storage Conditions | Dry, cool ≤ 30°C |
| Shelf Life | 12 months below 25°C |
Recommended Substrate Pretreatment
| Substrate | Mechanical Pretreatment | Chemical Pretreatment |
|---|---|---|
| Mild Steel | Grit Blasting Sa 2.5 (ISO 8501-1), Roughness Rz 35–60 µm / Ra 6–12 µm | Not applicable |
| Cast Steel | Not recommended | Not applicable |
| Electro Zinc Steel | Not recommended | Not applicable |
| Hot Dip Galvanized Steel | Not recommended | Degreasing & phosphating/chromating followed by passivation |
| Zinc Sprayed (Gas Flame / Electro Deposition) | Not recommended | Follow standard passivation |
Note: Proper pretreatment is critical to ensure adhesion, corrosion resistance, and long-term performance.
Application Guidelines
Application Method:Suitable forcorona electrostatic spraying. Tribo application isnot recommended.
Spray Parameters:
Fluidizing air pressure: 1.5 kg/cm² initially, then 1 kg/cm²
Transport air pressure: 0.5–0.8 kg/cm²
Recommended voltage: 65–70 kV
Curing:
Primer must be cured (or at least gelled) before topcoat application
Object temperature: 110–180°C
Cure in a convection oven, optionally with infra-red heating
Film Thickness:70–120 μm recommended for optimal protection
Recycling:Minimum 70% new powder recommended; gun nozzles must be cleaned every 30 minutes
System Integration & Topcoat Compatibility
MT-PZ is designed as abase primerin duplex or multi-layer coating systems. Compatible topcoats include:
Epoxy powders
Polyester or super-durable polyester powders for outdoor and architectural applications
Polyurethane liquid topcoats for enhanced chemical or mechanical resistance
This system is suitable forISO 12944 corrosion protection up to C4-H, depending on substrate preparation, total film build, and environmental exposure.
在线联系供应商
Other supplier products
 |
Low Cure Powder Coating | Introduction We are a professional powder coating manufacturer specializing in Low Cure Powder Coating designed to deliver excellent finish qualit... |
 |
Henan Shangqiu Jianye Headquarters Port powder coating | Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical properties, especia... |
|
|
Sand-Textured Wood Grain Powder | Introduction Sand-textured wood grain powder is a specialized powder coating designed to replicate the natural texture and appearance of wood whil... |
 |
Depropanizer inhibitor STD-2 | Depropanizer inhibitor STD-2 has a multifunctional effect. It can not only prevent the generation of scale, but also remove the scale that has been... |
 |
Environmentally Friendly Powder Coating | Our eco-friendly powder coatings are perfect for a wide range of applications, including appliances, furniture, automotive parts, industrial machin... |
Same products
 |
Powder coatings for automotive interior parts MT-A2201/MT-YN203GF | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YN218GF / | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be u... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I | 卖方: Standard International Group (HK) Limited | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof rack... |
 |
Basecoat powder coating MT-A2204/MT-MW188I | 卖方: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2204 basecoat comes in an... |
