Conventional powder coatings
WA：+86 132 6275 2056
WEB: std-coatings.com
Introduction
Conventional powder coatings are positioned in the mid-to-high-end market, with raw materials sourced from well-known domestic and international suppliers, ensuring product quality and stability from the very beginning. As a standard product, our strengths lie in the consistency of quality between batches and our rapid response to customer complaints. The GS series can be used for both indoor and outdoor applications, regardless of the system, and its leveling performance is comparable to liquid paints, allowing it to completely replace most liquid paints.
Application
Conventional powder coatings offer vibrant colors and stable heat resistance, providing excellent decorative and protective properties. The entire GS conventional powder coating range can be customized for both indoor and outdoor applications. The products come in a wide variety of colors, including black, white, gray, and various high-chroma colors (red, orange, yellow, green, blue, purple); diverse gloss levels, including high gloss, semi-gloss, and matte; and various surface effects, such as smooth, textured, hammered, wrinkled, cracked, speckled, soft-touch, PU effect, and acrylic effects. They are widely used in almost all fields, including building materials, furniture, electrical appliances, general industry, communication and information technology, automotive, and retail.
Features
| Item | Specification |
|---|---|
| Chemical Type | Epoxy/Polyester or Pure Polyester Type |
| Appearance | Flat, textured, wrinkled, and other artistic patterns |
| Curing Condition (Workpiece Temperature) | 200℃ / 10min; improper curing may cause loss of color, gloss, and coating performance |
| Gloss | Depends on specific product |
| Storage Condition | Sealed and stored in a dry, cool place below 30℃ |
| Shelf Life | 6 months (<30℃), 12 months (<25℃) |
| Packaging Specification | 25kg/carton |
Technical indicators
Note: Substrate and pretreatment: Mechanical performance tests were conducted using 0.6mm thick degreased cold-rolled steel plates; corrosion and aging resistance tests were conducted using 0.6mm thick zinc phosphated steel plates or chromated aluminum plates.
• Film thickness: 60-80μm • Curing conditions: 200℃/10min (workpiece temperature)
| Item | Index | Test Standard |
|---|---|---|
| Bending | Passed, curvature diameter 6mm | ASTM D522 |
| Passed, curvature diameter 4mm | GB/T 1731 | |
| Dry Adhesion | Passed, result 5B | ASTM D3359 |
| Passed, result Grade 0 | ISO 2409 | |
| Cupping Test | Passed, 6mm, no cracking/peeling | ISO1520 |
| Passed, 6mm, no cracking/peeling | GB/T 9753 | |
| Impact Resistance (Direct Impact) | ≥50kg·cm | ASTM D2794 |
| ≥50kg·cm | GB/T 1732 | |
| Pencil Hardness | ≥H | ASTM D3363 |
| ≥H | GB/T 6739 | |
| Chemical Resistance | Good (tested with general acids, alkalis, oils at room temperature) | / |
| Water Mist Resistance | Passed, 1000h, no blistering or loss of gloss | ASTM D1735 |
| Water Immersion Resistance | Passed, 24h, no blistering or loss of gloss | ASTM D870 |
| Neutral Salt Spray | Passed, 250h, no blistering or peeling | ISO 9227 |
Construction Reference
Conventional powder coatings can be applied using manual or automatic spraying equipment; for best results, automatic spraying equipment is recommended. Unused powder can be recycled through a suitable recovery system.
Atomizing air pressure: ~0.7 bar
Primary air pressure: ~0.7 bar
Recommended voltage: 40–90 kV
Safety Warning
During spraying, ensure that ventilation and dust collection systems are functioning properly, and that personnel take appropriate protective measures and wear suitable protective equipment. For more detailed information, please refer to the safety data sheet for the corresponding product.
在线联系供应商
Other supplier products
 |
Extreme Protection Edge | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com MT Extreme Protection Edge powder coatings deliver exceptional edge corrosion protectio... |
 |
Imitation Anodizing Coating Series | Key Features & Specifications FeatureSpecification / Benefit Anodizing-Like Matte Finish Replicates thesleek, low-gloss aesthetic ... |
 |
General industry powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Brief description: Made of saturated polyester resin, epoxy resin or epoxy polyeste... |
 |
High-gloss powder coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction High-gloss powder coatings are designed to provide a striking, reflect... |
|
|
EP hybrid powder coating | Product description It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the prod... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
