.

Friction Powder Coating

WA:+86 132 6275 2056

WEB: std-coatings.com

Introduction

The Friction Powder Coating series features an exclusive formula that provides superior powder application compared to electrostatic powder coatings, with excellent powder application in grooves.

Application

Friction Powder Coating products can be widely used in products such as heat sinks, enclosures, and cabinets that require powder coating in grooves, and are applied in industries such as LED lighting, furniture, and home appliances.

Features

ItemSpecification
Chemical Type Epoxy/Polyester or Pure Polyester Type
Appearance Flat, textured, hammered pattern
Curing Condition (Workpiece Temperature) 200℃ / 10min; improper curing may cause loss of color, gloss, and coating performance
Gloss Depends on specific product
Storage Condition Sealed and stored in a dry, cool place below 30℃
Shelf Life 6 months (<30℃), 12 months (<25℃)
Packaging Specification 25kg/carton

Technical indicators

Note: Substrate and pretreatment: Mechanical performance testing used 0.6mm thick degreased cold-rolled steel sheet; corrosion aging resistance testing used 0.6mm thick zinc-based phosphated steel sheet or chromated aluminum sheet.

• Film thickness: 60-80μm
• Curing conditions: 200℃/10min (workpiece temperature)

ItemIndexTest Standard
Bending Passed, curvature diameter 6mm ASTM D522
Passed, curvature diameter 4mm GB/T 1731
Dry Adhesion Passed, result 5B ASTM D3359
Passed, result Grade 0 ISO 2409
Cupping Test Passed, 6mm, no cracking/peeling ISO1520
Passed, 6mm, no cracking/peeling GB/T 9753
Impact Resistance (Direct Impact) ≥50kg·cm ASTM D2794
≥50kg·cm GB/T 1732
Pencil Hardness ≥H ASTM D3363
≥H GB/T 6739
Chemical Resistance Good (tested with general acids, alkalis, oils at room temperature) /
Water Mist Resistance Passed, 1000h, no blistering or loss of gloss ASTM D1735
Water Immersion Resistance Passed, 240h, no blistering or loss of gloss ASTM D870
Neutral Salt Spray Passed, 500h, no blistering or peeling ISO 9227

Construction Reference

Friction Powder Coating products cannot be applied with ordinary electrostatic spray guns; the matching friction gun must be used.

Safety Warning: When spraying, ensure proper ventilation and dust collection systems are functioning correctly. Workers must take appropriate protective measures and wear suitable protective equipment. For more detailed information, please refer to the safety information sheet for the corresponding product.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Light Yellow Sand Texture Powder Coating
Light Yellow Sand Texture Powder Coating Product specification Type Epoxy Powder Coating; Polyester Powder Coating;Epoxy-Polyester Powder Coating Color RAL&Pantone color ...
Luggage rack powder coating
Luggage rack powder coating Characteristics of powder coatings ”It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic”&...
RAL9003/90110/9016 Polyester White Powder coating
RAL9003/90110/9016 Polyester White Powder coating WA:+86 132 6275 2056 WEB: std-coatings.com Main Properties: Surface: Wrinkle Chemistry : Polyester Use : Indoor or outdoor use Application ...
Epoxy Anti-Corrosion Dual-Resistance Powder Coating for Coal Mines
Epoxy Anti-Corrosion Dual-Resistance Powder Coating for Coal Mines Product Introduction:This product is formulated using phenolic epoxy resin and incorporates modified conductive polymers and conductive materials, ...
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes Product Introduction:This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, d...
供应产品

Same products

Powder coating primer MT-Active EL140N
Powder coating primer MT-Active EL140N 卖方: Standard International Group (HK) Limited WA:+86 132 6275 2056 WEB: std-coatings.com Product Description MT-Active is a powder coating...
Powder coating primer MT-Active EL193N
Powder coating primer MT-Active EL193N 卖方: Standard International Group (HK) Limited WA:+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-Active is a powder coating pr...
Powder coating primer MT-Active EL193N
Powder coating primer MT-Active EL193N 卖方: Standard International Group (HK) Limited WA:+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-Active is a powder coating pr...
Powder coating primer containing zinc MT-PZ ALZ44TH
Powder coating primer containing zinc MT-PZ ALZ44TH 卖方: Standard International Group (HK) Limited WA:+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-PZ ALZ44TH is a high-performa...
Powder coating primer containing zinc MT-PZ ALZ55N
Powder coating primer containing zinc MT-PZ ALZ55N 卖方: Standard International Group (HK) Limited WA:+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-PZ ALZ55N is a high-performan...