Polyester powder coatings for indoor use MT-300
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product description
MT-300 is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the MT-300 series restrict the field of application of this powder coatings class to interior uses. MT-300 is designed for interior decoration such as, metal furniture, shop fittings, shelves, light fittings.
Powder properties
| Typical value | |
| Chemical Type | Polyester – TGIC |
| Density | 1.2 – 1.9 g/cm³, depending on colour and effect |
| Recommended film thickness | 60 – 90µm |
| Shelf life | 12 months below 30 ºC |
| Storage Conditions | (open boxes must be resealed) Dry, cool conditions |
| Curing schedule | 12-24 min at 180°C
8-16 min at 200°C 4-10 min at 210°C (at object temperature) |
Pre-treatment
Galvanised steel requires surface preparation by either multi-stage pretreatment using either zinc phosphate or chromate conversion or controlled sweep blasting. Depending on the type of galvanizing, degassing or use of anti-bubbling additives may be required – follow the procedural advice of the pretreatment supplier. Iron phosphate and particularly Zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
Powders can be applied by manual or automatic electrostatic spray equipment. A good protection is linked with the recommended film thickness. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid “marble effect”and changes in aspect after recycling. Different substrates (aluminium, steel, galvanized steel…), use of primer, and big changes in film thickness may give a different aspect. Products with different codes should not be mixed even if same colour and gloss. It is recommended that for consistent application and appearance product be fluidized during application. MT-300 powder coatings can be applied by corona electrostatic or tribostatic equipment. However, the aspect obtained by tribo static equipment may vary when compared to electrostatic application and/or our color card.
Test conditions
Actual product performance will depend upon the circumstances under which the product is used. Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Pre-treatment | Zinc Phosphate |
| Substrate | Polished steel |
| Curing schedule | 12 min at 200°C (object temperature) |
| Film Thickness | 60 – 70µm |
Mechanical tests
| Typical value | Method/standard | |
| Adhesion | Class 0 | ISO 2409 (2 mm Crosshatch) |
| Erichsen cupping | Pass 5 mm | ISO 1520 |
| Flexibility | Pass 5 mm | ISO 1519 |
| Hardness | Pass – no penetration to substrate | ISO 1518-1 (2000g) |
| Impact resistance | ≥30 kg.cm | ISO 6272-2 (d/r) |
在线联系供应商
Other supplier products
 |
Taro white Powder Coatings MT-70285 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-70285 Color Taro white Surface Fine sand texture matte ... |
 |
Gray series powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Silver gray powder coating MT- PMS0007 White pearl powder coating MT- PMS0015 |
 |
Metallic flat matte MT-049/95586 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/95586 Color White Surface Metallic flat matte System P... |
 |
Powder coating for automobile wheels MT-Al00 | Product Overview: Special powder coating for wheels (rims), a series of epoxy polyester powder coating products specially designed for the charact... |
|
|
Sand-textured powder coatings | Introduction Sand-textured powder coatings are a unique type of finish that provide a distinctive, tactile surface with a granular or sandy appear... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
