.

Automatic Cooled Cold-Cranking Simulators

Application range

Automatic Cooled Cold-Cranking Simulators applicable standards: GB/T6538 ASTM D5293, The instrument is mainly test cryogenic engine oil dynamic viscosity index using the advanced technology of the contemporary set of mechanical, optical, electronic and computer technology in one temperature measurement, temperature control. Precise temperature control and stability.

Automatic Cooled Cold-Cranking Simulators structure is reasonable, stable performance, simple operation, is ideal for analysis and detection equipment.

Features

1, Automatic Cooled Cold-Cranking Simulators with LCD display, man-machine friendly exchange interface

2, Automatic Cooled Cold-Cranking Simulators configuration automatic diagnostic system, automatic fault prompts

3, Automatic Cooled Cold-Cranking Simulators using the speed control system and imported brand in Flanders drive motor, a great extent on the stability of a stable and accurate control of The drive current to drive The motor speed, The result is more accurate

4, Automatic Cooled Cold-Cranking Simulators control system configuration automatically correcting speed system automatically corrected viscosity system, automatic correction function curve

5, Automatic Cooled Cold-Cranking Simulators using a smart operating system, The user simply one-button operation, The instrument automatically warming, automatic timing, automatic calculation, automatic thermostat, automatically save the results, and automatically print a report

Specifications

1, refrigeration: Imported compressor refrigeration

2, temperature range: room temperature ~ -35 ± 0.1 ° C

Robin fashion: imports of low-temperature circulating pump drive

4 Temperature control mode: single-chip temperature control system

5, The drive motor: imported motor

6,Display: LCD

7, correction: Standard Oil correction

8, power supply: AC220V ± 10% 50HZ

Design according customer demand


在线联系供应商

至: Changsha Friend Experimental Analysis Instrument Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Freezing point tester of petroleum products
Freezing point tester of petroleum products Color LCD, the analog trace shows a function of time warming up and test curve, automatic program sweep, automatic ignition, automatic detection, ...
快速阻垢性测定仪	FDQ-0202
快速阻垢性测定仪 FDQ-0202 Mercaptan sulfur analyzer FDQ-1271 Application range The mercaptan sulfur analyzer automatic titration principle of determination of mercaptan...
 copper corrosion analyzer LPG FDS-0301
copper corrosion analyzer LPG FDS-0301 Application range LPG copper strip corrosion tester for liquefied petroleum gas corrosive to copper measured According to SH/T0232-92 ,(LPG co...
FDT-0231
FDT-0231 The instrument is designed and made as per the National Standard GB/T261 ASTM D93 ISO 2719 Test Methods for Flash Point and Fire Point of Petroleum...
Нефтепродукты перегонки анализатор FDR-0841
Нефтепродукты перегонки анализатор FDR-0841 Automatic alkali value of petroleum products tester FDR-2271 Application range The instrument complies with SH / T 0251 standard experimental re...
供应产品

Same products

Single Screw Main Extruder
Single Screw Main Extruder 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. The Single Screw Main Extruderstands as a testament to human ingenuity and engineering excellence...
YDD系列生物样本库_液氮容器
YDD系列生物样本库_液氮容器 卖方: 河南天驰仪器设备有限公司 产品特点: 1. 兼容液相和气相两种储存方式; 2. 双层真空绝热设计; 3.容量≥350L,可容纳 2ml 冻存管数≥ 13000支;   4. 托盘底部大容量液氮设计,气相储存时...
不锈钢干细胞样本库设备 350 升低温储存罐
不锈钢干细胞样本库设备 350 升低温储存罐 卖方: Henan Tianzhidao Biological Technology Co., Ltd. 产品特点: 1. 兼容液相和气相两种储存方式; 2. 双层真空绝热设计; 3.容量≥350L,可容纳 2ml 冻存管数≥ 13000支;   4. 托盘底部大容量液氮设计,气相储存时...
GB-AY16-8D-A FULLY AUTOMATIC HEAT TRANSFER MACHINE FOR PENS
GB-AY16-8D-A FULLY AUTOMATIC HEAT TRANSFER MACHINE FOR PENS 卖方: 温岭市高宝实业有限公司 全自动制笔HT机技术参数:最大打印尺寸:16cm×8cm最大打印速度:30-60次/分钟最大打印高度:3.5cm机器尺寸:130 cm ×130cm X170cm机器重量...
厂家直销光学筛选机
厂家直销光学筛选机 卖方: Zhejiang Eyason Intelligent Technology Co.,Ltd 该光学筛选机设备可检测螺丝,螺母,铆钉,油封,弹簧垫片,形状特殊的五金件,电子元件等。精度高(最高可达±0.001mm),速度快(最快可达1000pcs/min),易操作,可根据客...