Fully Methylated Melamine-Formaldehyde Resin
Introduction
Fully Methylated Melamine-Formaldehyde Resin (FMMF): Overview and Key Properties
| Category | Details |
|---|
| Chemical Type |
Hexamethoxymethylmelamine (HMMM) |
| CAS Number |
3089-11-0 |
| Appearance |
Colorless to pale yellow viscous liquid |
| Solubility |
Soluble in water, alcohols, and most organic solvents |
Key Characteristics
Chemical Structure & Properties
| Property | Value | Significance |
|---|
| Methylation Degree |
>95% |
Ensures complete reactivity |
| Viscosity (25°C) |
300–800 mPa·s |
Impacts application flow |
| pH |
8.5–10.5 |
Stabilizes resin in storage |
| Reactive Sites |
6 methoxy groups per molecule |
High crosslinking density |
Curing Performance
| Parameter | Range | Notes |
|---|
| Self-Cure Temp. |
150–180°C |
Requires strong acid catalyst |
| Co-Cure Temp. |
120–150°C |
With hydroxyl/acid functional resins |
| Gel Time |
5–15 min @ 150°C |
Catalyst-dependent |
Applications
Primary Uses
| Industry | Application | Key Benefit |
|---|
| Coatings |
Automotive clearcoats |
High gloss, chemical resistance |
| Textiles |
Wrinkle-resistant finishes |
Durable crosslinks |
| Paper |
Wet-strength additives |
Improves fiber bonding |
| Adhesives |
Wood composites |
Low formaldehyde emission |
Formulation Guidelines
| Component | Typical % | Purpose |
|---|
| FMMF Resin |
15–30% |
Primary crosslinker |
| Acid Catalyst |
0.5–2% (e.g., p-TSA) |
Cure acceleration |
| Co-Resin |
50–70% (e.g., acrylic/polyester) |
Flexibility adjustment |
| Additives |
1–5% |
Flow/leveling control |
Advantages vs. Alternatives
| Feature | FMMF | Partially Methylated MF | Urea-Formaldehyde |
|---|
| Reactivity |
High |
Moderate |
Low |
| Formaldehyde Emission |
Very Low |
Moderate |
High |
| Water Resistance |
Excellent |
Good |
Fair |
| Cost |
$ |
$ |
$ |
Safety & Compliance
| Parameter | Status |
|---|
| VOC Content |
<250 g/L (compliant) |
| Food Contact |
FDA 21 CFR 175.300 |
| Storage |
12 months @ 25°C (inert atmosphere) |
Other supplier products
|
|
High boiling aromatic hydrocarbon solvent |
Introduction
High boiling point aromatic hydrocarbon solvent than the traditional toluene, xylene little toxicity, Flash point is high, use and tr... |
|
|
Silicone fluid（MT6000 ） |
PRODUCT DESCRIPTION
MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid.
APPLICATIONS
• Thermostatic fluids (-5... |
|
|
Coating for Busbar by Electrostatic Spray Application |
Product Description
MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
|
|
Epoxy resins |
Introduction to Epoxy Resins
Epoxy resins are a class of thermosetting polymers known for their exceptional adhesion, chemical resistance, and mec... |
|
|
Automotive Interior – Water based Adhesive |
The series of water-based adhesive products include two-component water-based polyurethane adhesive, which is widely used in the field of automotiv... |
供应产品
Same products
