.

CAS 615-50-9 2,5-Diaminotoluene sulfate

615-50-9 – Names and Identifiers

Name 2,5-Diaminotoluene sulfate
CAS 615-50-9
6369-59-1
EINECS 210-431-8
InChI InChI=1/C7H10N2.H2O4S/c;1-5(2,3)4/h2-4H,8-9H2,1H3;(H2,1,2,3,4)

615-50-9 – Physico-chemical Properties

Molecular Formula C7H12N2O4S
Molar Mass 220.24
Density 1366[at 20℃]
Melting Point >300°C(lit.)
Boling Point 273.7°C at 760 mmHg
Flash Point 140.6°C
Water Solubility soluble
Solubility 9.6g/l
Vapor Presure 0Pa at 25℃
Appearance powder to crystal
Color White to Light yellow to Light red
BRN 3755478
pKa 6.39[at 20 ℃]
PH 1.8 (9.6g/l, H2O, 20℃)
Storage Condition 2-8°C
Physical and Chemical Properties Melting point 300°C
water-soluble soluble
Use For hair dyes and organic intermediates

615-50-9 – Risk and Safety

Risk Codes R20/21 – Harmful by inhalation and in contact with skin.
R25 – Toxic if swallowed
R43 – May cause sensitization by skin contact
R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Description S24 – Avoid contact with skin.
S37 – Wear suitable gloves.
S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S61 – Avoid release to the environment. Refer to special instructions / safety data sheets.
UN IDs UN 2811 6.1/PG 3
WGK Germany 3
RTECS XT0525000
TSCA Yes
HS Code 29215119
Hazard Class 6.1
Packing Group II

615-50-9 – Reference Information

LogP 0.74 at 20℃
use for hair dye and organic intermediates
category toxic substances
toxicity classification highly toxic
acute toxicity oral-rat LD50: 98 mg/kg
flammability hazard characteristics open flame is combustible; heating emits toxic nitrogen oxide gas
storage and transportation characteristics warehouse ventilation and low temperature drying; separate from food raw materials storage and transportation
fire extinguishing agent water, carbon dioxide, sand, foam

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

polymeric isocyanate (MT-44V20)
polymeric isocyanate (MT-44V20) General Properties and Applications MT44V20 is a liquid, dark brown polymeric isocyanate based on diphenylmethane-4,4′-diisocyanate (MDI) wi...
Water based Adhesive
Water based Adhesive Introduction The series of water-based adhesive products include two-component water-based polyurethane adhesive, which is widely used in the fiel...
7PPD CAS 3081-01-4
7PPD CAS 3081-01-4 3081-01-4 –Names and Identifiers Name N-(1,4-dimethylpentyl)-N’-phenylbenzene-1,4-diamine Synonyms Einecs 221-374-3SANTOF...
DBSP 2,4-Bis(phenylsulfonyl)phenol CAS
DBSP 2,4-Bis(phenylsulfonyl)phenol CAS CAS: – Names and Identifiers Name 2.4-Bis(phenylsulfonyl)phenol Synonyms F-112 (DBSP)Bis(phenylsulfonyl)phenol2.4-bis(pheny...
Hydroxymethyl
Hydroxymethyl Introduction This type of product is mainly made by hydroxymethylation reaction of melamine and formaldehyde with different molar ratios. The fini...
供应产品

Same products

Epoxy/Polyester Powder Coatings
Epoxy/Polyester Powder Coatings 卖方: Standard International Group (HK) Limited Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
Polyester Clear Powder Coatings
Polyester Clear Powder Coatings 卖方: Standard International Group (HK) Limited This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
Acrylic Clear Powder Coatings
Acrylic Clear Powder Coatings 卖方: Standard International Group (HK) Limited Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
Polyurethane Powder Coatings
Polyurethane Powder Coatings 卖方: Standard International Group (HK) Limited Feature: -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
MDF Powder Coating
MDF Powder Coating 卖方: Standard International Group (HK) Limited Feature: -Environmental friendly -No solvents and volatile organic compounds involved which are...