Polyester based powder coating white
Product Description
MT-MA010G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellent light and weather resistance from a single coat finish.
Powder Properties
| Chemical type | Polyester TGIC-free |
| Appearance | Smooth Gloss |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.72 ± 0.05 g/cm³ |
| Film Thickness | 75 – 100 microns |
| Coverage | 7.8 ㎡/kg @75 microns |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
|
Stoving schedule (object temperature) |
10 - 15 minutes @ 205°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Cold Rolled Steel |
| Pretreatment | B1000 Iron phosphate |
| Film Thickness | 75 – 100 microns |
| Stoving Schedule | 10 minutes at 200°C |
Mechanical Tests
| test | results | |
| Flexibility | ASTM D522 | 3mm |
| Adhesion | ASTM D3359 | 100% |
| Impact (direct | ASTM D2794 | 160/160 kgcm |
| Gloss(@60°） | ISO 2813 | >90 |
| Hardness (scratch) | ASTM D3363 | H |
| Reflectance Class | DIN EN 16268 | A |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-MA010G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-MA010G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
在线联系供应商
Other supplier products
 |
MBTS (DM) CAS 120-78-5 | 120-78-5 –Names and Identifiers Name Accelerator (DM) Synonyms DMMBTSacceltmAccel TMAcceleratorDMAcelerator DMbenzothiazolylAcc... |
 |
Acrylate Instant Adhesive | Introduction MT941/MT912/MT994 series: One component quick curing, solvent-free cyanoacrylate adhesive. The product covers various specifications... |
 |
6PPD (4020) CAS 793-24-8 | 793-24-8 –Names and Identifiers Name N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine Synonyms BHTOX-4020Flexzone 7FVulka... |
 |
Aliphatic polyisocyanate (flexibilizing HDI trimer)-MT3800 | Introduction Characterization MT3800 is an aliphatic polyisocyanate (flexibilizing HDI trimer).It is suitable for use as the hardener compone... |
 |
Substrate wetting additive STD-249 | Introduction Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: None Scope ... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
