Normal EtCO2 Waveform Capnography Monitor Device
As a technology-based company, we have been focusing on developing and innovating carbon dioxide modules and monitors for more than 20 years. And we have been promoting etco2 series modules and cooperating with many well-known medical companies since 2008. Our products have obtained CE and ISO9000 certifications, and all products conform to RoHS. In 2020, its mainstream and side stream etco2 modules have been certified by US FDA. In addition, Beijing Kingst Commercial has successively launched the AneSure series of mainstream and side stream multi-gas modules and multi-gas monitors.
Types of Capnography Monitor Machine for Sale
We have ETCO2 products and anesthetic multi-gas products. The ETCO2 products are divided into ETCO2 monitors and ETCO2 modules. And Anesthetic multi-gas products are divided into Anesthetic Gas Detectors and Sensors. In addition, there are consumables to match the above modules and monitors.
Among them, infrared spectroscopy is the most widely used method. It mainly uses CO2 to absorb infrared rays with a wavelength of 4.26um, which attenuates the amount of infrared beams. The degree of attenuation is proportional to the CO2 concentration.
Understanding Normal Capnography Monitoring Devices Parameters
End-tidal CO2 concentration, or partial pressure (etco2 powerpoint), measured by Capnography Monitoring Devices, reflects pulmonary ventilation as well as pulmonary blood flow. When there is no obvious cardiopulmonary disease and the V/Q ratio is normal. ETCO2 can reflect PaCO2 (arterial blood carbon dioxide), normal ETCO2 is 5% equivalent to 5KPa (35-45mmHg).
When end-tidal carbon dioxide is too high: its physiological significance is that the alveolar ventilation is insufficient or the input of CO2 to the alveoli increases. And when End-tidal carbon dioxide is too low: mainly alveolar hyperventilation or reduced CO2 input to the alveoli.
End Co2 Monitoring
What is a capnography monitor?
Waveform capnography measures end-tidal partial pressure of carbon dioxide. This partial pressure value is called end-tidal CO2 or EtCO2. Its waveform can provide doctors with important information about a patient's health. Such as airway positioning, whether breathing is inhibited, and whether spontaneous breathing is restored as well as guidance on ventilator work.
Normal EtCO2 levels are 35 to 45 mm Hg and the waveform is generally trapezoidal. As the respiratory rate and tidal volume change, so do the waveforms and values.
What is waveform capnography monitor machine uses?What is waveform capnography monitor machine uses?
FAQs of Normal End Tidal CO2 Waveform Capnography
What Is End Tidal Co2 Monitoring？What Is End Tidal Co2 Monitoring？
End-tidal carbon dioxide (ETCO2) refers to the partial pressure (PEtCO₂) or concentration (CEtCO₂) value of carbon dioxide contained in the mixed alveolar air exhaled at the end of expiration. It has the characteristics of non-invasive, continuous, real-time and convenient.
As one of the most professional oem medical device manufacturers, we provide neonatal capnography, inline end tidal co2, infrared capnography, capnography bvm,
awrr capnography, capnography powerpoint, continuous capnography monitoring, etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Sidestream EtCO2 Capnography Module Capno-S | A sidestream etco2 sensor, accurate and durable, suitable for various complex environments. Compatible with multiple protocols. Plug and play, no z... |
 |
Nasal Oxygen Tube | Disposable and intended for single patient use only, avoid freezing or overheating during use and storage. Set the oxygen flow level prescribed ... |
 |
Accessories For ETCO2 & Anethesia Multi-Gas Monitors and Modules | The consumables and accessories produced by Kingst are all made of high-quality raw materials, with superior performance. T4F filters are our paten... |
 |
Accessories For ETCO2 & Anethesia Multi-Gas Monitors and Modules | The consumables and accessories produced by Kingst are all made of high-quality raw materials, with superior performance. T4F filters are our paten... |
 |
Anesthesia Multi-gas Detector AneSure™-S | Side stream anesthesia multigas sensor, can simultaneously measure the concentration waveform and data of CO2, N2O, anesthetic gases, as well as re... |
Same products
 |
4.3 Inch 800x480 RGB Interface IPS LCD Module | 卖方: Komkey co.,Limited | Kingtech4.3inch 800x480 /WVGA TFT LCD display is our most leading product. The supply is very lon... |
 |
3.2 Inch 240x320 MPU 8/16bit Interface LCD Display | 卖方: Komkey co.,Limited | Kingtech 3.2 tft lcd module displayis our most leading product. The 3.2inch 6 O'clock TN displ... |
 |
24bit RGB Interface 4.3 Inch 480x272 TFT LCD Display | 卖方: Komkey co.,Limited | Kingtech WQVGA TN 12 o'clock 4.3inch 480x272TFT LCD display is our leading 4.3 inch LCD display m... |
 |
1200x1920 High Resolution 8 Inch Mipi IPS TFT Display | 卖方: Komkey co.,Limited | Kingtech 8 inches 1200x1920 ips tft panelAll/free/wide viewing angle TFT LCD display is one of ou... |
 |
12.3 Inch Bar Type 1920x720 LCD Display With The Main Board | 卖方: Komkey co.,Limited | Kingtech 12.3inch 1920x720LCD screen has an existing Android & Linux Board. The 12.3inch is I... |
