QSFP28 100G CWDM4 2K
QSFP28 100G CWDM4 2K
The QSFP28 100G-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. It is compliant with the 100G 4WDM-10 MSA, which is based on the CWDM4 MSA version 1.1. It is interoperable with CWDM4 transceivers over a 2 km reach.
Features of QSFP28 100G CWDM4 2k
Reach: 2 km via SMF
Link budget assumes the use of KR4 FEC by the host
Uncooled CWDM DFB lasers, directly modulated
Electrical interface: retimed CAUI-4 per 100G Ethernet IEEE 802.3bm Annex 83E
User controllable Transmit Input Equalization and Receiver Output Amplitude
MSA-compliant performance monitoring via I2C interface
Fiber connector: SMF LC duplex connector
Hot-pluggable
0–70°C operating temp
Power dissipation < 3.5W
RoHS6 compliant (lead-free)
Applications of QSFP28 100G CWDM4 2k
100G CWDM4 Ethernet
InfiniBand 4x EDR
Specifications of QSFP28 100G CWDM4 2k
Optical Transmitter PerformanceOptical Receiver PerformanceRecommended Operating Environment
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Center Wavelength |
Ch0 |
λ0 |
- |
nm |
||
Ch1 |
λ1 |
- |
nm |
|||
Ch2 |
λ2 |
- |
nm |
|||
Ch3 |
λ3 |
nm |
||||
Bit Rate per Channel |
B |
Gb/s |
||||
Side Mode Suppression Ratio |
SMSR |
30 |
- |
- |
dB |
|
Average launch power, each lane |
- |
-6.5 |
- |
dBm |
||
Optical Modulation Amplitude (each lane) |
OMA |
-4.0 |
- |
dBm |
||
Launch power in OMA minus TDP, each lane |
OMA-TDP |
-5.0 |
- |
- |
dBm |
|
Transmission & dispersion penalty, each lane |
TDP |
- |
- |
dB |
||
RIN20 OMA |
- |
- |
- |
-130 |
dB/Hz |
|
Transmitter Reflectance |
- |
- |
- |
-12 |
dB |
|
Extinction Ratio |
ER |
- |
dB |
|||
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} |
{0.31, 0.4, 0.45, 0.34, 0.38, 0.4} CWDM4 MSA Technical Specifications Rev 1.1 |
|||||
Total average launch power |
- |
- |
- |
dBm |
||
Average launch power of OFF transmitter, each lane |
- |
- |
- |
-30 |
dBm |
|
Optical return loss tolerance |
- |
- |
- |
20 |
dB |
Pin Descriptions of QSFP28 100G CWDM4 2k
Pin |
Symbol |
Name/Description |
1 |
GND |
Ground |
2 |
Tx2n |
Transmitter Inverted Data Input |
3 |
Tx2p |
Transmitter Non-Inverted Data Input |
4 |
GND |
Ground |
5 |
Tx4n |
Transmitter Inverted Data Input |
6 |
Tx4p |
Transmitter Non-Inverted Data Input |
7 |
GND |
Ground |
8 |
ModSelL |
Module Select |
9 |
ResetL |
Module Reset |
10 |
Vcc Rx |
+3.3 V Power supply receiver |
11 |
SCL |
2-wire serial interface clock |
12 |
SDA |
2-wire serial interface data |
13 |
GND |
Ground |
14 |
Rx3p |
Receiver Non-Inverted Data Output |
15 |
Rx3n |
Receiver Inverted Data Output |
16 |
GND |
Ground |
17 |
Rx1p |
Receiver Non-Inverted Data Output |
18 |
Rx1n |
Receiver Inverted Data Output |
19 |
GND |
Ground |
20 |
GND |
Ground |
21 |
Rx2n |
Receiver Inverted Data Output |
22 |
Rx2p |
Receiver Non-Inverted Data Output |
23 |
GND |
Ground |
24 |
Rx4n |
Receiver Inverted Data Output |
25 |
Rx4p |
Receiver Non-Inverted Data Output |
26 |
GND |
Ground |
27 |
ModPrsL |
Module Present |
28 |
IntL |
Interrupt |
29 |
Vcc Tx |
+3.3 V Power supply transmitter |
30 |
Vcc1 |
+3.3 V Power Supply |
31 |
LPMode |
Low Power Mode |
32 |
GND |
Ground |
33 |
Tx3p |
Transmitter Non-Inverted Data Input |
34 |
Tx3n |
Transmitter Inverted Data Input |
35 |
GND |
Ground |
36 |
Tx1p |
Transmitter Non-Inverted Data Input |
37 |
Tx1n |
Transmitter Inverted Data Input |
38 |
GND |
Ground |
Important Notice of QSFP28 100G CWDM4 2k
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative.
TS Communicationis a professional fiber fiber optic products supplier, we provide qsfp28 100g,qsfp28 cwdm4, 100g qsfp28, qsfp 100g, qsfp28and etc. Want to know qsfp28 priceor more? Please contact us.
在线联系供应商
Other supplier products
PRE-TERMINATED MULTIFIBER CABLE | Pre terminated fiber cable assembliesconsist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MT... | |
FIBER OPTICAL COMPONENTS | As the Chinese mainland's first fiber optic component manufacturers, T&S has 20 years of production history and has the ability to produce from... | |
25G SPF28 AOC | 25GSFP28 AOC TSCommunicationTSSP-8525G-xxxC is a single-Channel, Pluggable, Fiber-Optic SPF28for 25 Gigabit Ethernet and Infiniband EDR Applicatio... | |
MTP®/MPO Harness Cable | MTP/MPOharness cables are a kind of MTP®/MPO fanout harness cable or breakout fiber optic harness assemblywith one MTP®/MPO connector on on... | |
100G QSFP28 AOC | T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/E... |
Same products
SFP28 25G Copper Twinax Cable XM DAC | 卖方: Wuhan Gearlink Technology Co., Ltd. | SFP28 Direct Attach Cables (25g sfp28 dac) are compliant with SFF-8432 and SFF-8402 specification... | |
SFP28 25G 1310nm 10km DDM LC Transceiver | 卖方: Wuhan Gearlink Technology Co., Ltd. | SYSP8A10D SFP28 lrtransceivers, according to 25 Gigabit Small Form Factor Pluggable “SFP28&... | |
SFP 155M 1550nm 80Km LC Transceiver | 卖方: Wuhan Gearlink Technology Co., Ltd. | GearLink’s 100M SFP optical fibre transceiverGAS7L0C31 is a small pluggable transceiver mod... | |
SFP+ 10G Tx1330/Rx1270 40Km LC Transceiver | 卖方: Wuhan Gearlink Technology Co., Ltd. | The SFP-10G-BX40 series single mode sfp transceiveris a small form-factor pluggable module for du... | |
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver | 卖方: Wuhan Gearlink Technology Co., Ltd. | SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber... |