40G QSFP+BREAKOUT AOC
T&SCommunication TSQSS-8540G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 40 Gigabit Ethernet Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. Each lane can operate at 10Gbps up to 300 m using OM3 fiber. As a professionaloptic connector supplierin China, T&S provideschina 40g qsfp to qsfp aoc cablesand china 40g qsfp+ dac cableswith high quality.The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector.
Features ofChina 40G QSFP+Breakout AOC
Electrical interface compliant to SFF-8436 and SFF-8431
850nm VCSEL laser and PIN photo-detector
Built-in digital diagnostic functions
Operating case temperature 0℃ to 70℃
Similar to the40G AOCproduced by T&S, this AOC breakout series is also hot Pluggable
RoHS compliant
Applications of 40G QSFP+BreakoutAOC
40GbE and 10GbE break-out applications for Datacom switch and router connections
40G to 4×10G density applications for Datacom and Proprietary protocol applications, Datacenters
Specifications of 40G QSFP+Breakout AOC
Absolute Maximum Ratings
Recommended Operating Conditions
Transmitter Specifications
Receiver Specifications
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Storage Temperature |
TS |
-20 |
85 |
℃ |
|
Relative Humidity |
RH |
0 |
85 |
% |
|
Case Operating Temperature |
TCase |
0 |
70 |
℃ |
|
Supply Voltage |
VCC |
-0.5 |
V |
Pin Descriptions of40G QSFP+Breakout AOC
Pin Definitions of40G QSFP+Breakout AOC
|
Pin |
Symbol |
Name/Description |
|
1 |
GND |
Ground |
|
2 |
Tx2n |
Transmitter Inverted Data Input |
|
3 |
Tx2p |
Transmitter Non-Inverted Data Input |
|
4 |
GND |
Ground |
|
5 |
Tx4n |
Transmitter Inverted Data Input |
|
6 |
Tx4p |
Transmitter Non-Inverted Data Input |
|
7 |
GND |
Ground |
|
8 |
ModSelL |
Module Select |
|
9 |
ResetL |
Module Reset |
|
10 |
Vcc Rx |
+3.3 V Power supply receiver |
|
11 |
SCL |
2-wire serial interface clock |
|
12 |
SDA |
2-wire serial interface data |
|
13 |
GND |
Ground |
|
14 |
Rx3p |
Receiver Non-Inverted Data Output |
|
15 |
Rx3n |
Receiver Inverted Data Output |
|
16 |
GND |
Ground |
|
17 |
Rx1p |
Receiver Non-Inverted Data Output |
|
18 |
Rx1n |
Receiver Inverted Data Output |
|
19 |
GND |
Ground |
|
20 |
GND |
Ground |
|
21 |
Rx2n |
Receiver Inverted Data Output |
|
22 |
Rx2p |
Receiver Non-Inverted Data Output |
|
23 |
GND |
Ground |
|
24 |
Rx4n |
Receiver Inverted Data Output |
|
25 |
Rx4p |
Receiver Non-Inverted Data Output |
|
26 |
GND |
Ground |
|
27 |
ModPrsL |
Module Present |
|
28 |
IntL |
Interrupt |
|
29 |
Vcc Tx |
+3.3 V Power supply transmitter |
|
30 |
Vcc1 |
+3.3 V Power Supply |
|
31 |
LPMode |
Low Power Mode |
|
32 |
GND |
Ground |
|
33 |
Tx3p |
Transmitter Non-Inverted Data Input |
|
34 |
Tx3n |
Transmitter Inverted Data Input |
|
35 |
GND |
Ground |
|
36 |
Tx1p |
Transmitter Non-Inverted Data Input |
|
37 |
Tx1n |
Transmitter Inverted Data Input |
|
38 |
GND |
Ground |
Pin Descriptions of40G QSFP+Breakout AOC
Pin Definitions of40G QSFP+Breakout AOC
|
PIN |
Symbol |
Name/Description |
|
1 |
VeeT |
Transmitter Signal Ground |
|
2 |
TX_FAULT |
Transmitter Fault (LVTTL-O) – Not used. Grounded inside the module |
|
3 |
TX_DISABLE |
Transmitter Disable (LVTTL-I) – High or open disables the transmitter |
|
4 |
SDA |
Two Wire Serial Interface Data Line (LVCMOS – I/O) (same as MOD-DEF2 in INF-8074) |
|
5 |
SCL |
Two Wire Serial Interface Clock Line (LVCMOS – I/O) (same as MOD-DEF1 in INF-8074) |
|
6 |
MOD_ABS |
Module Absent (Output), connected to VeeT or VeeR in the module |
|
7 |
RS0 |
Rate Select 0 - Not used, Presents high input impedance. |
|
8 |
RX_LOS |
Receiver Loss of Signal (LVTTL-O) |
|
9 |
RS1 |
Rate Select 1 - Not used, Presents high input impedance. |
|
10 |
VeeR |
Receiver Signal Ground |
|
11 |
VeeR |
Receiver Signal Ground |
|
12 |
RD- |
Receiver Data Out Inverted (CML-O) |
|
13 |
RD+ |
Receiver Data Out (CML-O) |
|
14 |
VeeR |
Receiver Signal Ground |
|
15 |
VccR |
Receiver Power + 3.3 V |
|
16 |
VccT |
Transmitter Power + 3.3 V |
|
17 |
VeeT |
Transmitter Signal Ground |
|
18 |
TD+ |
Transmitter Data In (CML-I) |
|
19 |
TD- |
Transmitter Data In Inverted (CML-I) |
|
20 |
VeeT |
Transmitter Signal Ground |
Mechanical Specificationsof40G QSFP+Breakout AOC.
在线联系供应商
Other supplier products
 |
AOC / DAC / TRANSCEIVER | Along with passive optical components, active optical components are indispensable elements of an optical network. T&S Communications adopts un... |
 |
FBG OPTICAL BRAGG GRATTING SENSORS | Being a fiber optic sensor, a FBG sensor has all the advantages usually attributed to these devices, such as low loss relative to the fiber length,... |
 |
QSFP+ 40G LR4 2KM | The qsfp module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems, and client-... |
 |
TELECOM AND FTTX NETWORKS | Telecom and FTTx Networks Fiber optical network in recent years tried hard to meet users' eager demands for even larger volume and much higher spe... |
 |
10G SFP+ AOC | T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performan... |
Same products
 |
Ball Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin... |
 |
Angle Polished Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully... |
 |
976nm 350W Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ... |
 |
940nm Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ... |
 |
940nm Band Pass Filter Optical Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Band Pass Filter Optical Fiber selectively transmits light with a wavelength of 940nm while... |
