Reticles
The precision custom reticlesis generally installed on the focal plane of the right eyepiece of the telescope. It is a thin glass with reticle dense lines engraved on the surface of the pole book. In theory, this thin optical reticleglass also participates in imaging and extends the focal length of the objective lens, which will have more or less influence on the length of the right eyepiece.
Ecoptik (also known as BRD Optical) is one of the few companies producing custom glass reticles because the precision reticles require extremely high cleanliness. Any tiny dust will produce large black spots during observation. At the same time, the accuracy of the installation position of the custom reticleis extremely high. Therefore, try not to disassemble it. If it is disassembled, it must be as it is recovery.
Custom Glass Reticles Applications
The glass reticle is generally installed on the focal plane of the right eyepiece of the telescope or scope. It is made of a thin glass with a very thin surface engraved with the reticle dense line. In theory, this thin glass is also involved in imaging, extending The focal length of the objective lens will more or less affect the length of the right eyepiece. The glass reticle has extremely high requirements for cleanliness, and any tiny dust will produce large black spots during observation, and the installation position of the reticle requires extremely high precision.
The glass reticle generally adopts chromium plating and etching to form the danger of the glass reticle. The line adopts chromium plating, and the luminous type is filled with titanium trioxide or zinc oxide powder after etching.
The glass reticle produced by Jiujing has an accuracy of +/-0.002m and is widely used in medical and military fields.
For special-purpose reticles, Jiujiang can customize anti-reflection, waterproof, oleophobic, and anti-glare coatings for customers.
There are many optical mirror manufacturers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
Cut Off Filter | Infrared cut filter is the use of precision optical coating technology on optical substrate plating alternately high and low refractive index of op... | |
Optical Prism | Optical Prism, a transparent object surrounded by two planes that intersect but are not parallel to each other, is used to split light or disperse ... | |
Pyramid Optical/Tetrahedral Prism | A pyramidal prism/angular cube reflector is always used to reflect a beam of light into the prism, regardless of the direction of the beam. Corner ... | |
Anamorphic Prism | Anamorphic Prism An anamorphic prism pairis a pair of prisms which is usually used for reshaping the profile of a laser beam. For example, the ell... | |
Infrared (IR) Dome | BRD IR Optical dome lens is composed of two parallel optical surfaces, (A convex surface & A Concave surface). Normally we can control the para... |
Same products
Ball Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin... | |
Angle Polished Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully... | |
976nm 350W Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ... | |
940nm Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ... | |
940nm Band Pass Filter Optical Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Band Pass Filter Optical Fiber selectively transmits light with a wavelength of 940nm while... |