SFP 1.25G Tx1550/Rx1490 80Km LC Transceiver
Gearlink’s GCS7L0C54 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The china optical transceiverconsists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser), and the PIN/TIA. The module data link up to 80km in 9/125um Single-mode fiber.
This transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical and bidi multimodesfp interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as fiber transceivertemperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.
The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.
Compatibility of SFP 1.25G Tx1550/Rx1490 80Km LC Transceiver
GLC-BX80-D-I1000BASE-BX80-U-SMF TX:1550nm/RX:1490nm 80km
Technical Specification Of SFP 1.25G Tx1550/Rx1490 80Km LC Transceiver
General Specifications
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
|
Bit Rate |
BR |
Gb/sec |
|||
|
Max |
80 |
km |
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
||
|
Storage Temperature |
TS |
-40 |
85 |
ºC |
||
|
Storage Ambient Humidity |
HA |
5 |
95 |
% |
||
|
Power Supply Voltage |
VCC |
-0.5 |
4 |
V |
||
|
Signal Input Voltage |
-0.3 |
Vcc+0.3 |
V |
|||
|
Receiver Damage Threshold |
3 |
dBm |
||||
|
Lead Soldering Temperature/Time |
Told |
260/10 |
ºC/sec |
Note 1 |
||
|
Lead Soldering Temperature/Time |
Told |
360/10 |
ºC/sec |
Note 2 |
在线联系供应商
Other supplier products
 |
QSFP28 100G LAN WDM 80km LC Transceiver | 100G QSFP28 ZR4100g zr4 qsfp28optical transceiver is mainly used for data center switches, routers, and long-distance transmission connections. QSF... |
 |
QSFP+ 40G 850nm XXm AOC | The Gearlink’s QSFP+ active optic cables are high performance, low power consumption, long reach interconnect solution supporting InfiniBand ... |
 |
10G SFP+ Transceiver | 10 Gigabit optical transceiver has a data rate of 10Gbps, packaging in SFP+. China 10g sfp+ transceiver is widely used in 10 Gigabit Ethernet, SDH ... |
 |
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver | SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber bidirectional optical module needs to use differe... |
 |
SFP 1.25G 1310nm 40Km LC Transceiver | GearLink’s gigabit optical fiber transceiverGCS5L0C31 is used in Gigabit Ethernet, dual-channel, and bidirectional transmission synchronous o... |
Same products
 |
Ball Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin... |
 |
Angle Polished Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully... |
 |
976nm 350W Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ... |
 |
940nm Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ... |
 |
940nm Band Pass Filter Optical Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Band Pass Filter Optical Fiber selectively transmits light with a wavelength of 940nm while... |
