SFP 1.25G Tx1310/Rx1490 10Km LC Transceiver

Gearlink’s SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The 1310nm 1490nm sfptransceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser(the 1490nm DFB laser), and the PIN/TIA. The module data link up to 10km in 9/125um Single-mode fiber.

Thissfp 1310 1490transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional optical/sfp bidi interface connector. An enhanced Digital Diagnostic Monitoring Interface.

compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.

The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.

SFP 1310 1490 Features

Simple to Use:Simple installation, plug and play, and fully hot-pluggable. With 1.25G SFP 1310 1490 ports, it is commonly used for the fiber switches, routers, NICs, servers, as well as other fiber optic equipment.

Superior DDM Function- DDM helps in monitoring critical information about the status of the transceivers' transmission and reception signals in real-time to identify potential issues.

Compatibility of SFP-GE10KT13R1410Km LC Transceiver

Cisco

Juniper

Brocade

Extreme

HP

HUAWEI

GLC-BX-U20	1000BASE-BX SFP BIDI 1310nm-TX/1490nm-RX 20km
GLC-2BX-U	1000BASE-BX10-U TX:1310nm/RX:1490nm 10km CSFP
GLC-BX-U	1000BASE-BX10-U SMF TX:1310nm/RX:1490nm 10km SFP

Technical Specification Of SFP 1.25G Tx1310/Rx1490 10Km LC Transceiver

1310nm 1490nm sfp General Specifications

Parameter	Symbol	Min		Max	Unit
Bit Rate	BR				Gb/s etc
	Max			10	km

SFP 1310 1490 Absolute Maximum Ratings

Parameter	Symbol	Min		Max	Unit
Storage Temperature	TS	-40		85	ºC
Storage Ambient Humidity	HA	5		95	%
Power Supply Voltage	VCC	-0.5		4	V
Signal Input Voltage		-0.3		Vcc+0.3	V
Receiver Damage Threshold		+3			dBm
Lead Soldering Temperature/Time	Told			260/10	ºC/sec	Note 1
Lead Soldering Temperature/Time	Told			360/10	ºC/sec	Note 2

Notes:

How to pair single-mode single-fiber optical transceivers?

The single-fiber optical SFPtransceiverrealizes data transmission through one fiber core. Data transmission and reception are realized through different optical wavelengths in one optical fiber. Single-fiber optical transceiver s are generally used in pairs. The A/B side parameters are reversed. The A/B side parameters are reversed. Example A terminal optical transceiver (Tx 1310nm/Rx 1490). B-end optical transceiver (Tx 1490nm/Rx 1310)

As a reliable optical module manufacturer, we will do our best to meet all the needs of customers.

Other supplier products

	QSFP28 100G Copper Twinax Cable XM DAC	QSFP28 Direct Attach Cables (dac cable 100g) are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to...
	Optical Transceiver	Gearlink Technology has been focusing on developing and manufacturing high speed optical fiber module and cable module transceivers including 400G ...
	400G Transceiver	With the explosive growth of network traffic, 400G optical transceiver will undoubtedly be the dominant rate in the following market. The current 4...
	QSFP-DD 400G SR8 100m MPO-16 Transceiver	400GQSFPDD SR8Optical Transceiver Module (400G QSFP-DD SR8) with Quad Small Form-Factor Pluggable Double Density (QSFP-DD) form-factor is of high p...
	SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver	SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber bidirectional optical module needs to use differe...

供应产品

Same products

	Indoor Wall Mounted Mini Fiber Optic FTTH Terminal Box 4 Ports White	卖方: Shenzhen UnitekFiber Solution Limited	UnitekFiber supplies 4 ports wall mounted opticsFaceplate & FTTH Terminal Box. This fiber opt...
	Introduction of Bulk Fiber Optic Cables Assembly	卖方: Shenzhen UnitekFiber Solution Limited	Bulk fiber optic cable for saleassemblies are convenient and economical fiber cable devices to ru...
	Description of breakout fiber optic cable	卖方: Shenzhen UnitekFiber Solution Limited	optical breakout cablealso can be called as distribution fiber optical cable is designed for Indo...
	AOC Active Optical Cable 40G QSFP to-4 x 10G SFP+ Breakout AOC Cable 5M	卖方: Shenzhen UnitekFiber Solution Limited	Active optical cable, as a main transmission medium for high-performance computers and data cente...
	Introduction of Anti-rodent Fiber Optic Cable	卖方: Shenzhen UnitekFiber Solution Limited	The rodent proof fiber optic cableis suitable for use in many places with lots of rats. The anti ...