Ringlock Scaffolding
TECON Scaffold Ringlock is designed and manufactured as the most convenient and efficient scaffolding ring lock system. It only consists of a few user-friendly components such as standard, ledger, diagonal brace, screw jack etc.. It can be used as a shoring system, facade platform, and work access for both the construction site and the industrial field
Features of Ringlock Scaffolding
Quick erection and dismantling with only a hammer
Safety and stability due to rigid wedge connections without loosening
Durability and less maintenance due to high strength steel and hot-dip galvanizing finishing
It can be used as an access tower with stairs inside to the site at the height
It can be used as shoring support to meet heavy load requirements
It can be used as a façade platform for site crew protection and a working platform at the height
Ring lock scaffolding dimensionsStandard
Eight holes on each rosette allow various tight connections from the ledger to the diagonal brace
Minimum 60µm hot-dipped galvanization
Main sizes of standard: 0.5 /1.0 / 1.5 / 2.0 / 2.5 /3.0 m
Main sizes of ledger: 0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4 m
High strength steel material: Q355 as standard
Despite of 48.3mm diameter standard, 60mm diameter standard is also available for heavier loading requirement
Application of Ringlock Scaffolding
Construction sites from residential & commercial buildings to fly-over roads, metro stations, ship yards, petrochemical plants and others.
Ring Lock/Ring lock scaffolding parts
Ring lock scaffolding is a type of modular scaffolding system that consists of various parts and components.
Here are the components of a ring lock system:
Standards provide the main support for the scaffolding structure.
It is typically made of steel tubes and has connection points at regular intervals.
Ledgers connect the standards, providing lateral support.
It is also made of steel tubes and has connection points on both ends.
Diagonal Braces provide stability and rigidity to the scaffolding structure.
It connects the standard and ledger at an angle.
Rosettes are attached to the standards, ledgers, and braces to create a secure connection.
It typically has multiple connection points, allowing for various configurations and angles.
Base Jacks are adjustable and placed at the bottom of the scaffolding structure to provide stability and level the scaffolding on uneven surfaces.
The height can be adjusted by extending or retracting
Transoms are placed between ledgers to provide additional support and create a working platform.
They are typically used in conjunction with scaffold planks.
Scaffold Planks are placed on the transoms to create a safe working area.
Scaffold planks are usually made of wood or metal and come in various lengths.
Toe Boards are attached to the ledgers and transoms at the edge of the working platform to prevent tools or materials from falling.
Couplers are used to connect scaffolding components.
It ensures a secure and rigid connection between standards, ledgers, and other parts of the scaffolding system.
Ladders allow workers to climb up and down the scaffolding structure safely.
It can be attached to the standards at various intervals.
For more information about formwork and scaffolding, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Shoring Props | TECON Shoring propscover the full range of props as floor support, fabricated on different load capacity, adjustable height and different raw mater... |
 |
Various Formwork Accessories are Also Available for Separate Purchase | Formwork Accessories TECON's formwork componentsinclude aluminium TMP prop, heavy-duty steel prop (EN1065), TECON-Form plywood (film faced plywood... |
 |
Timber Formwork | TECON Timber formwork mainly includes BASE 20 Wall Formwork, Flex 20 Slab Formwork, Slab Table Formwork and BASE 20 column timber formwork. Comb... |
 |
Formwork Accessories | Formwork Accessories TECON's shuttering componentsand formwork componentsinclude aluminium TMP prop, heavy-duty steel prop (EN1065), TECON-Form pl... |
 |
Beam & Slab Formwork | Beam & Slab Formwork TECON Slab and Beam formwork system mainly includes Flex 20 Slab Formwork, Slab Table Formwork, Aluflex Slab Formwork, Ste... |
Same products
 |
ASTM D5321 Geosynthetic Interface Shear Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Specification For direct shear test, ado... |
 |
JW-F Series Motorized Industrial Videoscope | 卖方: Shenzhen Joinwe Smart Co.,Ltd | The Motorized Industrial Endoscopeis an advanced visual inspection tool engineered for high-preci... |
 |
Fireplace | 卖方: XIAMEN HC WORLD STONE IMPORT&EXPORT CO.,LTD. | Product Attributes: Material:Crafted from premium natural stone—including marble, granit... |
 |
Bydi Escalator | 卖方: 空天白帝（苏州）机电科技有限公司 | Professional escalator manufacturerWe do ODM and OEM for Customers If you use our BYDI brand, we... |
 |
Bydi Passenger Lift | 卖方: 空天白帝（苏州）机电科技有限公司 | Professional lift manufacturer in Suzhou, China we can do ODM or OEM for Customer, with Customer... |
