46m Concrete Pump Truck
The 46-meter concrete pump, also known as the small orthopaedic concretepumping, is always used in the construction of floor heating. It can be used in the construction of various projects in the south, the conveyance of refractory and thermal insulation materials and the construction of many building floors. In use, fine-stone concrete pump motor often needs frequency conversion operation. How to speed the 46m concrete pump motor? Now we introduce it specifically as follows.
The mixer of the 46m concrete pump truck works through the drive of hydraulic motor. In use, the hopper and mixing mechanism are generally placed at the end of the pump truck, so that the concrete output from the pump truck mixer can be easily received. In order to accurately set up sequence valve for the hydraulic system of 46m concrete pump, it is necessary to know the working characteristics of sequence valve and adjust the working pressure of sequence valve. So how can you correct that?
If the adjustment pressure of the internal control sequence valve is too high and the working pressure of the working hydraulic cylinder is lower than its adjustment pressure, there may be pressure loss at the valve port of the sequence valve, which will cause temperature rise and heat of the system. At this point, the setting pressure of the internal control sequence valve can be reasonably determined, so that the working pressure of the working cylinder is higher than the opening pressure of the sequence valve. When the sequence valve works, the valve port will be fully open, with almost no pressure loss at the valve port, thus avoiding the system heating caused by improper pressure setting of the sequence valve.
It needs to be pointed out that the motor frequency control technology of 46m concrete pump vehicle can adjust the speed of the actuator by changing the frequency of the power supply. In this way, the electric opportunity of the pump vehicle is always in a high efficiency state. Applying motor frequency control technology to hydraulic control system of small aggregate concrete pump can overcome some disadvantages of hydraulic system, such as simplifying hydraulic circuit, reducing energy loss of hydraulic system, expanding speed control range, improving system efficiency and prolonging system life, etc.
We are one of the leading concrete pump truck manufacturers, RFQ today!
在线联系供应商
Other supplier products
 |
Used Concrete Boom Pump | It is a common fact that we find a wide variety of concrete machines on every construction sites, which make the construction jobs easy, safe and q... |
 |
6 Section Boom Concrete Pump Truck | Define of 6 Section Boom Concrete Pump Truck The six section pump truck, as the name implies, is a product type of the pump truck. With the help of... |
 |
38m Concrete Pump Truck | 38 meter concrete pumptruck is common in many construction sites. Before, the houses were transported by manpower. Now there are 38m concrete pump ... |
 |
49m Concrete Pimp Truck | Define of 6 Section Boom Concrete Pump Truck The six section pump truck, as the name implies, is a product type of the pump truck. With the help of... |
|
|
52m Concrete Pump Truck | Machine performance of 52m Concrete PumpTruck The concrete pump chassis of zoomlion ZLJ5430THBB 52x-6rz adopts noble German Benz chassis. Intellige... |
Same products
 |
HZJ-0.5混凝土振实台 | 卖方: 浙江路达机械仪器有限公司 | 该产品适用于实验室现场工地作为试件成型和预制构件厂振实各种板、柱梁等混凝土构件振实成型。 主要技术参数及其规格： 台面尺寸mm ：500×500 振动频率次/分：2860 振动幅度... |
 |
BYS-20标准养护恒温恒湿控制仪（喷淋） | 卖方: 浙江路达机械仪器有限公司 | 本产品适用于各实验室做大批量混凝土、水泥制品等试件的养护，集制冷、加热、加湿于一体，产品符合GBJ204-83、GBJ177-85及（ISO）GB/T17671。 特点：采用高精度最新的单片机控... |
 |
LDCL-B氯离子快速含量分析仪 | 卖方: 浙江路达机械仪器有限公司 | 本产品通过配备的专业软件及化学抗干扰试剂在室温下快速测定混凝土、砂石子、水泥、拌合水等无机材料的水溶性氯离子含量。 该产品符合标准如下： GB/T 50476-2008 《混凝土结构耐久性设... |
 |
TDRF-1 混凝土快速冻融箱 | 卖方: 浙江路达机械仪器有限公司 | 我公司为TDRF型混凝土快速冻融箱（装置）建材部标准起草单位，参与国家建材院《混凝土抗冻试验设备》标准制订。 本产品适用于对混凝土、建筑砖块、陶瓷砖及其它建材类材料进行冻融试验，产品符合DL/T... |
 |
ZH-DG.80型磁盘振动台 | 卖方: 浙江路达机械仪器有限公司 | 该仪器使用广泛，应用于监工、建材及科研单位，对混凝土试块或其他物料振实之用。 符合JG/T3020-94《混凝土试验用振动台》建工行业标准的技术要求。 主要技术参数及其规格： 外形尺寸mm... |
