Overmolding & 2k Molding

The same type of material of different colors is usually used for two-color injection overmolding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance difference of the two materials actually used may be very big, if the elastomer is injected into the surface of a rigid material, the most difficult thing to solve during 2k moulding process is the delamination and shedding of the bonding surface of the two materials.

OVER-MOULDED 2K MOLDS FOR SALE

Water Proof Plastic Enclosure Mold

The product will be made by two times, which will inject the second piece after finishing the first piece in the other mold and different injection machine, normally will be no specific request for 2 different pieces injection time, injection machine.

Drip Tip Mold

The two-color molding will be made in one same injection machine at the same time by 2 times injection, with 2 injection barrels and 2 different injection gates by 2 different molds, but the product will be picked up one time, it will request 2 molds in one specific 2k injection machine to finish final injection.

2K Mold

This mold will be put with a movable core on gate position of the core side, the movable core is pushed to the rising position when injecting the first-color material, and the first color part is solidified, After that, the movable core return back through the action of the hydraulic device, at this time, another barrel injects the second color material into the space left by the retreat of the core, the mold is opened and the part is taken out after finishing one injection after it's solid.

Material Selection For 2K Plastic Injection Moulding

In addition to meeting the requirements of product function and appearance in the material selection of two-color products, whether the adhesion between raw materials can be solved well will be related to the success of two-color products in 2k moulding process is also the difficulty of 2k moulding technology.

The following four points should also be considered in the selection of materials for two-color injection molded products:

3. plastic injection overmoldingprocess, because in the 2k injection molding process, although the two injection cycles are relatively independent, the entire injection cycle time is the same, so it is necessary to focus on controlling the injection time of the two-cavity injection cycles, cooling time and pressure holding time, so as to ensure that the product can be produced normally; at the same time, it is also necessary to control the injection volume, injection speed, and mold temperature, this is because in 2k plastic injection moulding, changing the injection volume and mold temperature can make the degree of mixing of the plastic part or the thickness of each layer occur. Change, and whether the injection speed is appropriate or not, will directly affect whether the melt may have turbulent flow or cause the outer layer of the plastic part to rupture during the flow process.

2K Molding Design Guide

Structural design is the most important part of 2k moldingproduct design, the structure design of the product should not only consider the function of the product but also consider whether it meets the processing conditions and the complexity of the processing mold, in the design of two-color injection products, in addition to the issues to be considered for ordinary injection products, the following aspects should also be considered:

As professional 2k molding factory, we will do our best to provide more types of related products for sale, if you have needs, please contact us.

As one of injection molding manufacturers, we will do our best to meet all the needs of customers.

Other supplier products

	Engine Coolant Pipe	Engine Coolant Pipe Gas-assisted plastic injection mouldingequipment mainly includes nitrogen generators, superchargers, gas-assisted controller...
	Drip Tip Mold	2k Electronic Cigarette Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable ...
	Overmolding & 2k Molding	Molding Over Molding& 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection...
	Car Door Mold	Car Window Mould Automotive Door Bracket Mold can shorten the fixture wasting(the fixture will improve the slight deformation) and it has very goo...
	Automotive Water Intake Manifold Mould	AutomotiveWater Inlet Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not requ...

供应产品

Same products

	Plastic Injection Lightweight Pallet Mould	卖方: Zhejiang Huaqi Information Technology Co., LTD	Discover the Pallet Mould, a game-changer in the world of logistics and material handling. Our Pa...
	Flange Molding	卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD	Flange Molding Flanged joint is the main connection method in pipeline construction. Compared to...
	Injection Mold Manufacturing	卖方: HANKING MOULD ENGINEERING LTD.	HanKing Mouldhas the advantages of low labor cost, short mold manufacturing lead time, excellent ...
	Car Seat Mould for Kids	卖方: Green Vitality Industry Co., Limited	Child safety seats are seats specially designed to protect children from injury or death in a col...
	Industrial Plastic Injection Mold	卖方: Green Vitality Industry Co., Limited	The injection molding part is replacing metal products in many fields of industrial applications ...