SLAG POT
SLAG POT
Both ferrous and non-ferrous metallurgical enterprises produce a large amount of high-temperature liquid slag, and the vast majority of steel furnace manufacturers use slag bags (or slag potand slag tanks) to load and process slag. Before the birth of welding slag ladle technology, users used casting slag ladle to treat furnace slag. After the birth of welding slag ladle, compared with casting slag ladle, the slag pot carrierembodies significant advantages such as stable quality, low maintenance rate, good weldability, and high cost-effectiveness.
STRENGTH
CHNZBTECH SLAG POT STRENGTH
CHNZBTECH Slag Pot Strength
Starting from the source, Huazhu Mold CAE simulation system is used to simulate and arrange the process, ensuring the quality of the slag tank.
When flipping sand molding, experienced engineers provide on-site guidance, strictly controlling the mesh size of refractory sand, the number of coating applications, the selection of parting surfaces, and the size of each area.
Blow argon on the molten steel to make its composition uniform, improve its quality, and strictly control the appropriate pouring temperature during pouring temperature to ensure the internal quality of the casting.
Using a German GS1000 direct reading spectral analyzer, samples are taken and analyzed in front of, in, and behind the furnace to ensure material quality good.
The use of natural gas heat treatment kiln ensures uniform temperature and ensures the internal quality of the slag tank. Service life is higher than 30% of peers.
FEATURES
SLAG POT FEATURES
During the steelmaking process, the liquid slag will reach high temperature, and the special slag pot for steelmaking needs to have good high temperature resistance and be able to withstand long-term operation in a high temperature environment.
The slag liquid contains many solid particles, and these particles will cause wear on the inner wall of the slag pot. Therefore, the special slag pot for steelmaking needs to have high wear resistance and be able to resist the impact and wear of particles.
With good sealing performance, these industrial furnace spare parts can effectively prevent the leakage of slag liquid and avoid pollution and damage to the environment and equipment.
A large amount of metallurgical slag will be produced in the steelmaking process, and the special slag pot for steelmaking usually has a large capacity, which can meet the large collection and storage needs of slag liquid in the steelmaking process.
Equipped with slag outlet, slag discharge valve, slag shovel and other equipment, it can conveniently collect and process slag liquid.
If you want to know more kinds of steel plant furnace, please visit our website.
在线联系供应商
Other supplier products
 |
Submerged ARC Furnace | The saf submerged arc furnace(SAF) is a specialized heating system utilized to produce a range of iron alloys using electric power. The smelting pr... |
 |
LRF LADLE REFINING FURNACE | LRF ladle refining furnace is the most widely used refining equipment outside the furnace at present. The LRF furnace is used to refine the molten ... |
 |
Furnace Auxiliary Equipment | Steelmaking is a continuous process. The meltshop is a hazardous environment, filled with intense heat, suffocating dust, glowing metal, and open f... |
 |
OXYGEN LANCE MANIPULATOR | The carbon oxygen lance mainly refers to the EAF smelting, generally referring to the carbon oxygen lance at the EAF furnace door, as well as the f... |
 |
LADLE PRE-HEATER | vertical ladle preheaterare suitable for different types of gas or liquid fuels. Such as blast furnace gas, mixed gas, natural gas, propane, acetyl... |
Same products
 |
Steel Searcher Steel Product & Hardware | 卖方: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ... |
 |
Frac PU Layflat Hose | 卖方: SUZHOU SEAPEAK CO.,LTD | The outer cover of our PU layflat hose has been produced with extra thickness for tough environme... |
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... |
 |
SDS Micro Copper Coated Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... |
 |
SDS Loose Hooked End Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha... |
