ASTM A516 / ASME SA516
ASTM A516 / ASME SA516
ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service.
ASTM A516/A516M specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. The steel shall be killed and shall conform to fine austenitic grain size requirements. The mechanical properties such as tensile strength, yield strength, and elongation shall be determined by a tension test for the plates.
| Standard:ASTM A516/A516M |
| Grade : ASTM A516 Gr 55, 60, 65, 70 |
| Thickness : 8mm -260mm |
| Width : 1000mm-4000mm |
| Length : 1000mm-20000mm |
| MOQ: 1 PC |
| Product type : Steel plate |
| Delivery time : Promptly ( Stock) or 10-40 days (Production) |
| Stock : Available |
| MTC: Available |
| Delivery condition: As Rolled or Normalized |
![]()
![]()
We are a professional ASME SA516 and ASTM A516 steel stockist and supplier. We can supply different product type and grades of ASME SA516 . If you have any need of ASME SA516 steel please do not hesitate to contact us .
ASME SA516
ASME SA516 Grade 55
ASME SA516 Grade 60
ASME SA516 Grade 65
ASME SA516 Grade 70
ASTM A516 Grade 55
ASTM A516 Grade 60
ASTM A516 Grade 65
ASTM A516 Grade 70
Other supplier products
|
|
ASTM A515 / ASME SA515 |
/ ASME SA515
ASTM A515/A515M Standard Specification For Pressure Vessel Plates, Carbon Steel, For Intermediate-And Higher-Temperature Service
ASTM ... |
|
|
H Beams / H Section Steel |
H Section Steel
H steel is a more efficient and economical section with high section area distribution, because its section is the same as the Eng... |
|
|
Angle Bar |
Angle, the steel strip is perpendicular to each other on both sides into the corner. There are equilateral angle steel and unequal edge angle steel... |
|
|
Steel Plate |
Mould steel plate is a kind of steel used to make mould of cold stamping mould, hot forging mould, casting mould and so on. Mold material is the ma... |
|
|
ASTM A537 / ASME SA537 |
ASTM A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel.
ASTM A537A537M Standard Specificat... |
供应产品
Same products
