ASTM A516 / ASME SA516
ASTM A516 / ASME SA516
ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service.
ASTM A516/A516M specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. The steel shall be killed and shall conform to fine austenitic grain size requirements. The mechanical properties such as tensile strength, yield strength, and elongation shall be determined by a tension test for the plates.
| Standard:ASTM A516/A516M |
| Grade : ASTM A516 Gr 55, 60, 65, 70 |
| Thickness : 8mm -260mm |
| Width : 1000mm-4000mm |
| Length : 1000mm-20000mm |
| MOQ: 1 PC |
| Product type : Steel plate |
| Delivery time : Promptly ( Stock) or 10-40 days (Production) |
| Stock : Available |
| MTC: Available |
| Delivery condition: As Rolled or Normalized |
![]()
![]()
We are a professional ASME SA516 and ASTM A516 steel stockist and supplier. We can supply different product type and grades of ASME SA516 . If you have any need of ASME SA516 steel please do not hesitate to contact us .
ASME SA516
ASME SA516 Grade 55
ASME SA516 Grade 60
ASME SA516 Grade 65
ASME SA516 Grade 70
ASTM A516 Grade 55
ASTM A516 Grade 60
ASTM A516 Grade 65
ASTM A516 Grade 70
Other supplier products
|
|
EN10225 |
EN10225 Weldable Structural Steels for Fixed Offshore Structures.
Technical Delivery Conditions
BS EN 10225 specifies requirements for weldable st... |
|
|
ASTM A514 / ASME SA514 |
ASTM A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
ASTM A514/A514M stan... |
|
|
Angle Bar |
Angle, the steel strip is perpendicular to each other on both sides into the corner. There are equilateral angle steel and unequal edge angle steel... |
|
|
ASTM A516 / ASME SA516 |
ASTM A516 / ASME SA516
ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service.
ASTM A51... |
|
|
ASTM A516 / ASME SA516 |
ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service.
ASTM A516/A516M specification c... |
All supplier products
Same products
