Silicone rubber coated fiberglass sleeve
500°F/260°CContinuous Exposure: Higher Intermittent
Silicone rubber coated fiberglass sleeve
Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Thermo Fire Braided Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Fiberglass Silicone Sleevingwithstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Silicone rubber coated fiberglass sleevewill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Aerospace AS1072 Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
ProudlyMadeByBSTThermalProtectionProductsCo.,Ltd
| Inside diameter - mm | Inside diameter tolerance -mm | Thickness and tolerance - mm |
| 4-10 | ± 0.3 | 3.0± 0.2 |
| 12-18 | ± 0.4 | 3.5± 0.3 |
| 20-32 | ± 0.8 | 4.0± 0.4 |
| 35-55 | ± 1.0 | 4.3 ± 0.5 |
| 60-100 | ± 1.0 | 4.5 ± 0.5 |
| 105-150 | ± 1.0 | 5.5± 0.5 |
|
Thermo Fire Braided Sleeve- Quick Facts | |
|---|---|
|
Custom colours available by special order. |
|
|
Continuous operating temp: |
500°F (260°C) |
|
Max short term exposure: |
3000°F (1650°C) |
|
Molten splash resistance: |
Outstanding |
|
Flame resistance: |
Very good |
|
Abrasion resistance: |
Very good |
|
Flexibility: |
Outstanding |
|
Water and oil resistance: |
Outstanding |
在线联系供应商
Other supplier products
 |
Fiberglass Thermal Insulation Blanket Jacket Cover | Fiberglass Thermal Insulation Blanket Jacket Coveris used to insulate engine parts, exhaust piping and components, and industrial process piping an... |
 |
Custom Sewn Removable Blankets | Mattress insulation blanketis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In particu... |
 |
Automotive Heat Protection Tubes | ThisAluminum Heat Shield Sleeveis made by aluminium, stainless steel, coated glass-fibre, PET-Fleece, paper, insulation material. 2 layer, 3 layer,... |
 |
red fiberglass exhaust wrap | red fiberglass exhaust wrapfeatures a color coating which not only gives your vehicle that custom look, but it also increases the life of the color... |
 |
Heat Shield Mat with adhesive | Heat Shield Mat with adhesive offers an excellent way to reflect radiant heat away from a vehicle‘s interior and because of its flexibility, ... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | 卖方: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | 卖方: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | 卖方: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | 卖方: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
