Silicone rubber coated fiberglass sleeve

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

500°F/260°CContinuous Exposure: Higher Intermittent

Silicone rubber coated fiberglass sleeve

Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.

Thermo Fire Braided Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).

Sheds splash immediately
Fiberglass Silicone Sleevingwithstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.

Withstands intense radiant heat and flame
Silicone rubber coated fiberglass sleevewill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.

Aerospace AS1072 Grade Fire Sleeve is constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.

Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.

Other supplier products

	aluminum foil glass cloth,Aluminum foil fiberglass lamination,aluminum thermal reflective foil insulation	aluminum foil glass cloth,Aluminum foil fiberglass lamination,aluminum thermal reflective foil insulation Application: 1.Used as the thermal insula...
	Heat Exchanger Removable Insulation	Heat Exchanger Removable Insulationis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In...
	titanium Black Exhaust Heat Tape Wrap	1200°F / 648°C Continuous Exposure: Higher Intermittent titanium Black Exhaust Heat Tape Wrap titanium Heat Pipe Ceramic Fiber Insulationis...
	Steam Trap Insulation Covers	Steam Trap Insulation Coversis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In partic...
	Heat resistant silicone coated fiberglass sleeving	500°F/260°C Continuous Exposure: Higher Intermittent Heat resistant silicone coated fiberglass sleeving Knitted high bulk glass fiber fire...

Same products

	Nylon Head Hot Dip Galvanized Spindle For Pin Insulator	Seller: Electric Powertek Company Ltd	Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm...
	ANSI C29.5 55-4M Pin Insulator for Bangldesh	Seller: Electric Powertek Company Ltd	The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ...
	Ground Wire Glass Insulator	Seller: Electric Powertek Company Ltd	Glass insulatorsare a crucial component in the insulation and support of overhead transmission li...
	Phenolic Thermal Insulation Board	Seller: Langfang Clear Chemical Building Materials Co., Ltd	Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c...
	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK	Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr...