Blast furnace BF Refractory Tap Hole Clay Waterless Taphole Clay
Tap hole mass is used in the Blast furnace nozzle during the smelting process to prevent the molten metal from entering the nozzle.The exposed surface of the sand produces a sintered layer thick enough to prevent molten metal penetration yet thin enough to allow it to break under the pressure of the molten metal when the nozzle is opened and the free flowing sand beneath the sintered layer flows out of the open nozzle
Other supplier products
|
Metallurgy Refractory Reheating Furnaces Honeycomb Regenerator Cast Regenerator Ball Regenerator BurnerRegenerative Case Barrier |
Our products have the following advantages: Low pressure loss Wide specific area, Fast heat-transfer speed and Excellent thermal shock resistance L... |
|
Andalusite Mullite Brick Mullite Cordierite Brick Hot Blast Stove Combustion Regenerator |
Full Series refractories for Hot Blast Stove, including Low Creep Alumina brick, High Alumina Insulation Brick Fireclay Insulating Brick, Floating ... |
|
Refractory Mortar Nozzle Filling Sand Gunning Mixes Ramming Mixes MgO-based Ramming Mix Shotcreting Mass Castables Self flow Castables for Ladle Refractories LF Steel Making Industry |
The SG series of mortars are classified as chrome-corundum, high-alumina, alumina-magnesia, magnesia based and carbon-containing type. The series o... |
|
Refractories Tundish Sliding Plates Burned Slide Plates Alumina Zirconia Carbon Sliding Plate |
High-temperature burned slide plates have high strength, high erosion/ corrosion resistance, excellent thermal shock resistance and designed for lo... |
|
Ladle Refining Refractory Purging Plugs Twin Purging Plug Porous Plug |
We produces a wide range of MgO-C brick. These brick contain carbon (from 5%-20%) and fused, sintered, or large crystal Magnesite. These products a... |
供应产品
Same products