Blast furnace BF Refractory Tap Hole Clay Waterless Taphole Clay
Tap hole mass is used in the Blast furnace nozzle during the smelting process to prevent the molten metal from entering the nozzle.The exposed surface of the sand produces a sintered layer thick enough to prevent molten metal penetration yet thin enough to allow it to break under the pressure of the molten metal when the nozzle is opened and the free flowing sand beneath the sintered layer flows out of the open nozzle
Other supplier products
|
|
Hot Repairing Mix Gunning Mix Ramming Mix Converter refractory BOF refractories |
SG-RB/RX series of hot repair mix is suited for using at trunnion area, taphole area and large working surface in converter. Taking high purity mag... |
|
|
Ladle Refining Furnace Roof EAF Delta Roof Tapping spout |
Excellent thermal shock resistance ,Good erosion/corrosion resistance ,Long service life |
|
|
Ladle Refining Refractories LF Well Block Seating Block Housing Block Sleeve Block |
SG-WS series of ladle bottom seating blocks are made from high-purity, high-density, high-strength materials with a matrix-adjusted system (MAS). T... |
|
|
Refractories Lime Kiln Calcium silicate board Alumina Silica Board Fiber board |
Wide range refractories, Alumina bricks,Leight Weight Insulating Clay Brick,Calcium silicate board,Fiber felt,65% Al2O3 Arch Bricketc. For Lime Kil... |
|
|
Three Casting Block Shroud Mono Block Stopper Submerged Entry Nozzle Tundish Refractories |
Ladle shroud is the refractory to connect ladle to tundish. It stabilizes steel stream and protect the steel from oxidation and splashing. The seri... |
All supplier products
Same products
