Electric Hoist

CD1 Electric Hoist

1. Brief description

CD1 electric hoist has only normal speed, which can satisfy the general working requirement.

MD1 electric hoist has one more hoisting motor and one slow speed actuating device, which make the model have two speeds. When it works slowly, it can satisfy the precise task such as precise working of loading and unloading, sand to break-in.

2. Applications

It can travel rotation through the trolley hanging on the I-steel, and install on the single beam crane, gantry crane, jib crane and overhang crane to rise and fall the cargos. So it can be used in factories, mines, wharf, warehouse, freight yards, and shops and so on which need lifting equipment for lifting heavy objects. Such as mining companies and railways, docks, warehouses. It is prohibited to manned.

3. Components

Motor: Hoist Motor is an taper type rotor motor with braking,it is made by Nanjing special motor factory,it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently.

Trolley: It is assembled and has running wheels. Herein, the runner wheels are mounted on top-class sealed ball bearings.

Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings , to ensure smooth, low-friction operation.

Wire Rope: Hoisting rope comply with the exporting ISO standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric control system: Model CD1 and MD1 is composed of the contactor box,controlling switch,cut-off limiter.the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition.

Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting .

Testing: All our Hoists are tested on 125 % thus assuring safe working load and is issued with a test certificate.

If you need other type electric hoist, please tell us, we will be pleased to be of further assistance!



在线询价

至: 中企起重
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Electric Hoist
Electric Hoist CD1 Electric Hoist 1. Brief description CD1 electric hoist has only normal speed, which can satisfy the general working requirement. MD1 electric h...
1 ton light duty electric hoist single girder gantry crane
1 ton light duty electric hoist single girder gantry crane MH Single girder gantry crane · used together with CD1,MD1 model  electric hoist · lifting capacity is 1 to 32 ton &mi...
overhead bridge crane
overhead bridge crane Worshop overhead travelling crane also been called single beam / single girder bridge crane 1. This overhead crane is characterized by more re...
JM electric winch
JM electric winch JM model slow speed electric winch is most commonly used winch in construction site or workshop, etc. And power supply for the electric winch varie...
Electric harga hoist overhead crane 10 ton
Electric harga hoist overhead crane 10 ton LD/LDA  single girder overhead crane Lifting capacity: 1-25t Span: 7.5m-30m Attention: It is prohibited to use in the combustible, explosive ...
供应产品

Same products

100 ton to 300 ton bridge erection crane beam launcher for highway or railway 卖方: Huada Heavy Industry
120 ton drawing customized double girder beam launcher bridge erecting machine 卖方: Huada Heavy Industry
中国电动链葫芦生产厂家
中国电动链葫芦生产厂家 卖方: 电动葫芦说明 电动葫芦是典型的独特优化结构,可缩短机体与梁轨之间的距离,适用于低侧建筑物的操作,特别适用于临时竖立的工厂建筑物内或在其内有效起吊空间扩展的场所建筑物需要机器的最重要的部件是链和制...
1吨20吨80吨钢丝绳电动葫芦出售
1吨20吨80吨钢丝绳电动葫芦出售 卖方: 钢丝绳电动葫芦应用 1. CD和MD钢丝绳电动葫芦是小型起重设备,可安装在单梁桥式起重机,单梁龙门起重机,起重机吊臂或I型梁上。 2.钢丝绳电动葫芦提升速度为7m / min,MD钢丝绳电动葫...
室内车间用半门机
室内车间用半门机 卖方: 具体细节 装载量:0.5〜32T 2.起升高度:3-30M,或根据您的要求定制 3.间距:3〜35M 4.工作职责:A3〜A6 5.电源:220〜440V,50 / 60HZ,单相或三相 6.工...