C post roll forming machine
Our C post roll forming machine is used to produce C posts for guardrails as per customer requirements. This C post roll forming line can continuously form steel sheets and automatically cut to length with PLC control and AC (alternating current) frequency conversion.C Post Roll Forming Machine Technical Parameter1. Parameter of Raw Material
|
Material |
Thickness (mm) |
|
ID (mm) |
Yield strength (MPa) |
||
|
Hot rolled steel |
4 |
Ø508 |
1200 |
≤ 300 |
5 |
|
Thickness tolerance (mm) |
tolerance (mm) |
Steel straightness (mm/m) |
ID tolerance (mm) |
Material standard |
|
± 0.07 |
+0 / -0.2 |
±15 |
GB |
Note:1. Unevenness tolerance of plate surface: ≤ 10% of steel thickness.2. If the plate has coating, the coating should be consistent with relevant coating inspection standards. No chipping that may affect the quality of plate exists.3. If the material is galvanized steel, it should be consistent with relevant testing standards of galvanized steel. No chipping that may affect the quality of plate exists.Working Conditions of C Post Roll Forming Line
|
Temperature (°C) |
-10 ~ 35 |
|||||||
|
Voltage |
380V, 50 HZ, 3 Phase |
|||||||
|
Total power (kW) |
About 40 |
|||||||
|
Color |
Main body |
Protective cover |
Moving parts |
Protective nets |
||||
|
RAL5015 |
RAL3020 |
RAL1016 |
RAL9017 |
|||||
|
RAL5015 |
RAL3020 |
RAL1016 |
RAL9017 |
|||||
|
Production capacity (m/min) |
15 (punching and cutting time excluded) |
|||||||
|
Dimensions (L × W × H, m) |
25 × 5 × 2 |
|||||||
|
Specification of shipping container (estimate number, the final data should be confirmed two weeks before delivery) |
||||||||
|
Container |
40GP |
40OH |
40OT |
20GP |
20OH |
20OT |
||
|
Number |
2 |
|||||||
C Post Roll Forming Machine Working FlowDecoiling → levelling → punching → roll forming → cutting→ conveying to the runout tableComponent List
|
Item |
Quantity (set / piece) |
Remark |
|
|
1 |
Decoiler |
1 |
|
|
2 |
Levelling device |
1 |
|
|
3 |
Punching machine |
1 |
|
|
4 |
Roll forming machine |
1 |
|
|
5 |
Roll forming mould |
1 |
|
|
6 |
Shearing machine |
1 |
|
|
7 |
Runout table |
1 |
|
|
8 |
Hydraulic system |
1 |
|
|
9 |
Electric control system |
1 |
|
|
10 |
Spare parts |
1 |
|
|
11 |
Technical instruction |
1 |
Component Description1. Decoiler: hydraulic expansion and automatic rotation.2. Levelling deviceThe levelling roller is made of GCr15 (hardness: HRC58-62) with thermal treatment.3. Punching device: driven by hydraulic power system.4. Roll forming machine: column structure and chain transmission.5. Cutting machine(1) There is no waste after cutting;(2) Cutting tolerance: ±2mm.6. Runout table7. Hydraulic system
在线联系供应商
Other supplier products
 |
2-Wave Guardrail Roll Forming Machine | This fully automatic 2-wave guardrail roll former can produce 2-wave guardrails as per customer requirements. Our 2-wave guardrail roll forming... |
 |
Roof tile making machine | DescriptionThis Roof tile making machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel... |
 |
ridge cap roll forming machine | This ridge cap roll forming machine is designed for continuously rolling and cold forming steel sheets. Our ridge cap roll forming line adopts st... |
 |
steel floor plate roll forming machine | This steel floor plate roll forming machine is primarily used for the integrated production of trailer floor plates. This diamond plate roll fo... |
 |
Refrigerator Panel Roll Forming Machine | Refrigerator Panel Roll Forming Machineadopts Cantilevers drive by gear, this type roll former advantage: adjust the plate width quickly. After c... |
Same products
 |
1435mm 数显轨距尺 | 卖方: 武汉联科瑞际轨道设备有限公司 | 铁路数显轨距尺主要用于铁路线路轨距、超高、查照间隔、护背距离 的测量。可供工务维修、大修、工程测量及其他有关部门线路作业时使用。 该仪器测量速度快、使用方便，白天、夜间均可使用，是工务、工程部门... |
 |
NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool | 卖方: Zhejiang Huaqi Information Technology Co., LTD | ● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ... |
 |
DC series high efficiency european jaw crusher | 卖方: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd. | Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste... |
 |
Internal Combustion rail drilling machine for rail construction | 卖方: 834406 | NZG-31型汽油机轨道钻孔机 该机器是铁路维护、施工和紧急维修作业中不可或缺的工具。采用空心钻头，具有快开功能的螺母夹紧机构，夹紧速度快，定位准确，钻孔快，操作简单，使用... |
 |
Brown Fused Alumina For Abrasive | 卖方: ZHENGZHOU HAOYUN NEW MATERIAL TECHNOLOGY CO., LTD. | Cooled and smelted under an electric arc at a high temperature above 2000 degrees, brown fused al... |
